APRS Track Direct

My position About ☰

reset

HS0AB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS0AB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1758175170	2 Pkt	3 Pkt	3 Pkt	-46 dBm	14.64 V
1758174245	0 Pkt	3 Pkt	1 Pkt	-43 dBm	14.42 V
1758173321	2 Pkt	1 Pkt	0 Pkt	-44 dBm	14.36 V
1758172396	2 Pkt	7 Pkt	1 Pkt	-43 dBm	14.56 V
1758171471	5 Pkt	4 Pkt	1 Pkt	-43 dBm	14.29 V
1758170547	0 Pkt	4 Pkt	0 Pkt	-46 dBm	14.77 V
1758169623	2 Pkt	6 Pkt	0 Pkt	-47 dBm	14.48 V
1758168698	2 Pkt	5 Pkt	2 Pkt	-45 dBm	14.46 V
1758167773	2 Pkt	0 Pkt	0 Pkt	-45 dBm	14.56 V
1758166849	0 Pkt	3 Pkt	0 Pkt	-44 dBm	14.58 V
1758165925	2 Pkt	5 Pkt	0 Pkt	-44 dBm	14.72 V
1758165000	5 Pkt	6 Pkt	0 Pkt	-45 dBm	14.52 V
1758164075	2 Pkt	2 Pkt	0 Pkt	-45 dBm	14.54 V
1758163151	0 Pkt	3 Pkt	0 Pkt	-45 dBm	14.52 V
1758162226	2 Pkt	5 Pkt	2 Pkt	-44 dBm	14.72 V
1758161302	2 Pkt	5 Pkt	1 Pkt	-43 dBm	14.36 V
1758160377	1 Pkt	7 Pkt	0 Pkt	-44 dBm	14.54 V
1758159452	0 Pkt	5 Pkt	1 Pkt	-45 dBm	14.77 V
1758158527	5 Pkt	6 Pkt	1 Pkt	-45 dBm	14.29 V
1758157601	4 Pkt	9 Pkt	1 Pkt	-46 dBm	14.27 V
1758156676	3 Pkt	5 Pkt	1 Pkt	-46 dBm	14.27 V
1758155751	0 Pkt	0 Pkt	0 Pkt	-45 dBm	14.62 V
1758154827	2 Pkt	0 Pkt	0 Pkt	-44 dBm	14.56 V
1758153902	2 Pkt	1 Pkt	1 Pkt	-46 dBm	14.29 V
1758152978	6 Pkt	0 Pkt	0 Pkt	-46 dBm	14.36 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)