APRS Track Direct

My position About ☰

reset

OE3BUB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3BUB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Solar 2*	Temp In*	Rx1h*	Eff1h*	AMD*
1732299400	13.73 Volt	7 C	580 Pkt	80 Pcnt	10 C
1732299100	13.73 Volt	7 C	590 Pkt	80 Pcnt	10 C
1732298800	13.73 Volt	7 C	590 Pkt	80 Pcnt	10 C
1732298500	13.73 Volt	7 C	610 Pkt	80 Pcnt	10 C
1732298200	13.73 Volt	7 C	620 Pkt	81 Pcnt	10 C
1732297900	13.73 Volt	7 C	620 Pkt	82 Pcnt	10 C
1732297600	13.73 Volt	7 C	600 Pkt	81 Pcnt	10 C
1732297300	13.73 Volt	7 C	610 Pkt	82 Pcnt	10 C
1732297000	13.73 Volt	7 C	610 Pkt	81 Pcnt	10 C
1732296700	13.73 Volt	7 C	620 Pkt	82 Pcnt	10 C
1732296400	13.73 Volt	7 C	620 Pkt	81 Pcnt	10 C
1732296100	13.73 Volt	7 C	640 Pkt	81 Pcnt	10 C
1732295800	13.73 Volt	7 C	630 Pkt	81 Pcnt	10 C
1732295500	13.73 Volt	7 C	650 Pkt	81 Pcnt	10 C
1732295200	13.73 Volt	7 C	660 Pkt	81 Pcnt	10 C
1732294900	13.73 Volt	7 C	650 Pkt	81 Pcnt	10 C
1732294600	13.73 Volt	7 C	650 Pkt	80 Pcnt	10 C
1732294300	13.73 Volt	7 C	660 Pkt	79 Pcnt	10 C
1732294000	13.73 Volt	7 C	670 Pkt	79 Pcnt	10 C
1732293700	13.73 Volt	7 C	690 Pkt	80 Pcnt	10 C
1732293400	13.73 Volt	7 C	710 Pkt	82 Pcnt	10 C
1732293100	13.73 Volt	7 C	720 Pkt	82 Pcnt	10 C
1732292800	13.73 Volt	7 C	710 Pkt	82 Pcnt	10 C
1732292500	13.73 Volt	7 C	720 Pkt	82 Pcnt	10 C
1732292200	13.73 Volt	7 C	720 Pkt	83 Pcnt	10 C

*Used Equation Coefficients:

Solar 2: 0, 0.075, 0

Temp In: 0, 0.5, -64

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

AMD: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)