This is the latest recevied telemetry packets stored in our database for station/object TA6DDX-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1732280758 | 220 Pkt | 76 Pkt | 7 Pkt | -45 dBm | 14.83 V |
1732278131 | 250 Pkt | 60 Pkt | 8 Pkt | -44 dBm | 14.85 V |
1732276287 | 235 Pkt | 66 Pkt | 19 Pkt | -42 dBm | 14.85 V |
1732274445 | 259 Pkt | 72 Pkt | 23 Pkt | -41 dBm | 14.85 V |
1732272599 | 328 Pkt | 46 Pkt | 23 Pkt | -43 dBm | 14.03 V |
1732270179 | 231 Pkt | 119 Pkt | 2 Pkt | -41 dBm | 14.85 V |
1732268330 | 194 Pkt | 116 Pkt | 3 Pkt | -42 dBm | 14.85 V |
1732266485 | 201 Pkt | 95 Pkt | 4 Pkt | -48 dBm | 14.85 V |
1732264640 | 163 Pkt | 98 Pkt | 13 Pkt | -43 dBm | 14.85 V |
1732262801 | 218 Pkt | 74 Pkt | 38 Pkt | -41 dBm | 14.85 V |
1732260957 | 179 Pkt | 65 Pkt | 38 Pkt | -46 dBm | 14.85 V |
1732259116 | 189 Pkt | 55 Pkt | 45 Pkt | -44 dBm | 14.85 V |
1732257280 | 178 Pkt | 15 Pkt | 43 Pkt | -48 dBm | 14.85 V |
1732253811 | 145 Pkt | 93 Pkt | 16 Pkt | -43 dBm | 14.85 V |
1732251973 | 193 Pkt | 89 Pkt | 5 Pkt | -42 dBm | 14.85 V |
1732250129 | 175 Pkt | 93 Pkt | 2 Pkt | -48 dBm | 14.83 V |
1732248287 | 159 Pkt | 77 Pkt | 14 Pkt | -48 dBm | 14.85 V |
1732246446 | 198 Pkt | 55 Pkt | 24 Pkt | -56 dBm | 14.87 V |
1732244601 | 190 Pkt | 37 Pkt | 12 Pkt | -50 dBm | 14.85 V |
1732242760 | 167 Pkt | 63 Pkt | 6 Pkt | -49 dBm | 14.85 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)