This is the latest recevied telemetry packets stored in our database for station/object ZL1ROT-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732296024 | 128 | 11 | 505 | 373 | 0 |
| 1732295123 | 127 | 11 | 500 | 277 | 0 |
| 1732294222 | 127 | 11 | 495 | 184 | 0 |
| 1732293321 | 127 | 11 | 495 | 184 | 0 |
| 1732292420 | 127 | 11 | 494 | 62 | 0 |
| 1732291519 | 127 | 11 | 492 | 2 | 0 |
| 1732290618 | 127 | 11 | 493 | 0 | 0 |
| 1732289718 | 127 | 11 | 493 | 0 | 0 |
| 1732288817 | 127 | 11 | 492 | 0 | 0 |
| 1732287916 | 127 | 11 | 493 | 0 | 0 |
| 1732287015 | 127 | 12 | 493 | 0 | 0 |
| 1732286114 | 127 | 12 | 493 | 0 | 0 |
| 1732285213 | 127 | 12 | 494 | 0 | 0 |
| 1732284312 | 127 | 12 | 495 | 0 | 0 |
| 1732283411 | 127 | 12 | 493 | 0 | 0 |
| 1732282510 | 127 | 12 | 493 | 0 | 0 |
| 1732281609 | 127 | 12 | 491 | 0 | 0 |
| 1732280708 | 127 | 12 | 493 | 0 | 0 |
| 1732279807 | 127 | 12 | 491 | 0 | 0 |
| 1732278906 | 127 | 12 | 492 | 0 | 0 |
| 1732278005 | 127 | 12 | 492 | 0 | 0 |
| 1732277104 | 127 | 12 | 492 | 0 | 0 |
| 1732276203 | 127 | 13 | 493 | 0 | 0 |
| 1732275302 | 127 | 13 | 493 | 0 | 0 |
| 1732274401 | 127 | 13 | 493 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)