APRS Track Direct

My position About ☰

reset

DB0SLF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0SLF. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1732572419	13.13 Volt	480 Pkt	150 Pkt	76 Pcnt	9.5 C
1732572418	13.13 Volt	480 Pkt	150 Pkt	76 Pcnt	9.5 C
1732571823	13.43 Volt	490 Pkt	150 Pkt	80 Pcnt	9.5 C
1732571818	13.43 Volt	490 Pkt	150 Pkt	80 Pcnt	9.5 C
1732571221	13.43 Volt	490 Pkt	150 Pkt	82 Pcnt	9.5 C
1732571218	13.43 Volt	490 Pkt	150 Pkt	82 Pcnt	9.5 C
1732570623	13.43 Volt	470 Pkt	150 Pkt	81 Pcnt	9.5 C
1732570618	13.43 Volt	470 Pkt	150 Pkt	81 Pcnt	9.5 C
1732570020	13.13 Volt	500 Pkt	160 Pkt	79 Pcnt	9.5 C
1732570018	13.13 Volt	500 Pkt	160 Pkt	79 Pcnt	9.5 C
1732569424	13.43 Volt	480 Pkt	150 Pkt	76 Pcnt	9.5 C
1732569418	13.43 Volt	480 Pkt	150 Pkt	76 Pcnt	9.5 C
1732568820	13.13 Volt	460 Pkt	150 Pkt	73 Pcnt	9.5 C
1732568818	13.13 Volt	460 Pkt	150 Pkt	73 Pcnt	9.5 C
1732568218	13.13 Volt	450 Pkt	150 Pkt	72 Pcnt	9 C
1732568218	13.13 Volt	450 Pkt	150 Pkt	72 Pcnt	9 C
1732567620	13.13 Volt	490 Pkt	150 Pkt	73 Pcnt	9.5 C
1732567618	13.13 Volt	490 Pkt	150 Pkt	73 Pcnt	9.5 C
1732567024	13.43 Volt	490 Pkt	150 Pkt	73 Pcnt	9 C
1732567018	13.43 Volt	490 Pkt	150 Pkt	73 Pcnt	9 C
1732566422	13.43 Volt	510 Pkt	150 Pkt	72 Pcnt	9 C
1732566418	13.43 Volt	510 Pkt	150 Pkt	72 Pcnt	9 C
1732565820	13.28 Volt	520 Pkt	160 Pkt	73 Pcnt	9 C
1732565818	13.28 Volt	520 Pkt	160 Pkt	73 Pcnt	9 C
1732565219	13.43 Volt	540 Pkt	170 Pkt	74 Pcnt	9 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)