This is the latest recevied telemetry packets stored in our database for station/object F1ZRP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Tint* | Hint* | RxPkts* | TxPkts* | Value5* |
|---|---|---|---|---|---|
| 1790653422 | 20.8 C | 60 % | 0 Count | 0 Count | 0 |
| 1790650152 | 20.9 C | 60.1 % | 0 Count | 0 Count | 0 |
| 1790647288 | 20.9 C | 60.1 % | 0 Count | 0 Count | 0 |
| 1790644350 | 20.9 C | 60 % | 0 Count | 0 Count | 0 |
| 1790642015 | 20.9 C | 59.9 % | 0 Count | 0 Count | 0 |
| 1790639179 | 20.9 C | 59.9 % | 0 Count | 0 Count | 0 |
| 1790636598 | 20.9 C | 60 % | 0 Count | 0 Count | 0 |
| 1790633726 | 21 C | 60.2 % | 0 Count | 0 Count | 0 |
| 1790631034 | 21 C | 60.4 % | 0 Count | 0 Count | 0 |
| 1790628002 | 21.1 C | 60.5 % | 0 Count | 0 Count | 0 |
| 1790625198 | 21 C | 60.5 % | 0 Count | 0 Count | 0 |
| 1790622267 | 21 C | 60.4 % | 0 Count | 0 Count | 0 |
| 1790619734 | 21 C | 60.3 % | 0 Count | 0 Count | 0 |
| 1790616738 | 21 C | 60.3 % | 0 Count | 0 Count | 0 |
| 1790613823 | 21 C | 60.3 % | 0 Count | 0 Count | 0 |
| 1790611137 | 20.9 C | 60.3 % | 0 Count | 0 Count | 0 |
| 1790608525 | 20.9 C | 60.3 % | 0 Count | 0 Count | 0 |
| 1790605516 | 20.8 C | 60.2 % | 0 Count | 0 Count | 0 |
| 1790602758 | 20.7 C | 60.1 % | 0 Count | 0 Count | 0 |
| 1790599927 | 20.7 C | 59.9 % | 0 Count | 0 Count | 0 |
| 1790597216 | 20.6 C | 59.7 % | 0 Count | 0 Count | 0 |
| 1790594569 | 20.5 C | 59.5 % | 0 Count | 0 Count | 0 |
| 1790591775 | 20.4 C | 59.4 % | 0 Count | 0 Count | 0 |
| 1790589135 | 20.3 C | 59.4 % | 0 Count | 0 Count | 0 |
| 1790586546 | 20.2 C | 59.3 % | 0 Count | 0 Count | 0 |
*Used Equation Coefficients:
Tint: 0, 1, 0
Hint: 0, 1, 0
RxPkts: 0, 1, 0
TxPkts: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)