This is the latest recevied telemetry packets stored in our database for station/object DF0OH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Batt12V* | Batt48V* | I48V* | Umin* | Cell#* |
---|---|---|---|---|---|
1753710704 | - | - | - | - | - |
1753710695 | 13.63 V | 48.91 V | -99.9 A | 2.03 V | 17 # |
1753709707 | 13.63 V | 48.98 V | -99.9 A | 2.03 V | 17 # |
1753708760 | 13.63 V | 49.06 V | -99.9 A | 2.03 V | 17 # |
1753707816 | 13.62 V | 49.15 V | -99.9 A | 2.03 V | 17 # |
1753706884 | 13.63 V | 48.96 V | -99.9 A | 2.03 V | 17 # |
1753705940 | 13.63 V | 49.01 V | -99.9 A | 2.03 V | 17 # |
1753705029 | 13.63 V | 49.09 V | -99.9 A | 2.03 V | 17 # |
1753704081 | - | - | - | - | - |
1753704063 | 13.62 V | 49.15 V | -99.9 A | 2.03 V | 17 # |
1753703107 | 13.63 V | 49.45 V | -99.9 A | 2.03 V | 17 # |
1753702186 | 13.63 V | 49.32 V | -99.9 A | 2.03 V | 17 # |
1753701251 | 13.62 V | 49.09 V | -99.9 A | 2.03 V | 17 # |
1753700330 | 13.63 V | 48.83 V | -99.9 A | 2.03 V | 17 # |
1753699375 | 13.62 V | 48.66 V | -99.9 A | 2.03 V | 17 # |
1753698432 | 13.62 V | 48.5 V | -99.9 A | 2.03 V | 17 # |
1753697520 | 13.53 V | 47.72 V | -99.9 A | 2.03 V | 17 # |
1753696577 | 13.63 V | 48.48 V | -99.9 A | 2.03 V | 17 # |
1753695645 | 13.63 V | 48.41 V | -99.9 A | 2.03 V | 17 # |
1753694700 | 13.62 V | 48.3 V | -99.9 A | 2.03 V | 17 # |
1753693766 | 13.63 V | 48.35 V | -99.9 A | 2.03 V | 17 # |
1753692833 | 13.63 V | 48.24 V | -99.9 A | 2.03 V | 17 # |
1753691866 | 13.63 V | 48.15 V | -99.9 A | 2.03 V | 17 # |
1753690945 | 13.63 V | 48.11 V | -99.9 A | 2.03 V | 17 # |
1753690011 | 13.63 V | 48.11 V | -99.9 A | 2.03 V | 17 # |
*Used Equation Coefficients:
Batt12V: 0, 0.01, 0
Batt48V: 0, 0.01, 0
I48V: 0, 0.01, -100
Umin: 0, 0.01, 0
Cell#: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)