APRS Track Direct

My position About ☰

reset

NA9VY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NA9VY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Volts*	IntTemp*	Rx1h*	Rx10m*	Eff*
1732273931	13.95 Volt	77.9 F	260 Pkt	38 Pkt	63 Pcnt
1732273331	13.88 Volt	77.9 F	270 Pkt	33 Pkt	63 Pcnt
1732272731	13.95 Volt	77.9 F	270 Pkt	50 Pkt	63 Pcnt
1732272131	13.88 Volt	77.9 F	270 Pkt	38 Pkt	63 Pcnt
1732271531	13.88 Volt	77.9 F	280 Pkt	41 Pkt	63 Pcnt
1732270931	13.8 Volt	77.9 F	290 Pkt	47 Pkt	63 Pcnt
1732270333	13.95 Volt	77.9 F	290 Pkt	40 Pkt	63 Pcnt
1732269731	13.95 Volt	77.9 F	290 Pkt	41 Pkt	63 Pcnt
1732269131	13.95 Volt	77.9 F	290 Pkt	45 Pkt	63 Pcnt
1732268531	13.95 Volt	77.9 F	300 Pkt	48 Pkt	63 Pcnt
1732267931	13.95 Volt	77.9 F	290 Pkt	48 Pkt	63 Pcnt
1732267331	13.88 Volt	77.9 F	280 Pkt	48 Pkt	63 Pcnt
1732266731	13.95 Volt	77.9 F	290 Pkt	40 Pkt	63 Pcnt
1732266131	13.95 Volt	77.9 F	280 Pkt	36 Pkt	63 Pcnt
1732265531	13.95 Volt	77.9 F	280 Pkt	57 Pkt	63 Pcnt
1732264931	13.95 Volt	77 F	280 Pkt	32 Pkt	63 Pcnt
1732264331	13.95 Volt	77.9 F	290 Pkt	44 Pkt	63 Pcnt
1732263731	13.88 Volt	77 F	290 Pkt	53 Pkt	63 Pcnt
1732263131	13.95 Volt	77 F	280 Pkt	33 Pkt	63 Pcnt
1732262531	13.95 Volt	76.1 F	290 Pkt	39 Pkt	63 Pcnt
1732261933	13.88 Volt	77.9 F	290 Pkt	56 Pkt	63 Pcnt
1732261331	13.95 Volt	77 F	280 Pkt	45 Pkt	63 Pcnt
1732260731	13.88 Volt	77 F	270 Pkt	39 Pkt	63 Pcnt
1732260133	13.95 Volt	77 F	280 Pkt	42 Pkt	63 Pcnt
1732258931	13.95 Volt	77 F	250 Pkt	42 Pkt	63 Pcnt

*Used Equation Coefficients:

Volts: 0, 0.075, 0

IntTemp: 0, 0.9, -83.2

Rx1h: 0, 10, 0

Rx10m: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)