APRS Track Direct

My position About ☰

reset

N1DTA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N1DTA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1750178478	13.2 Volt	990 Pkt	270 Pkt	77 Pcnt
1750178182	13.2 Volt	970 Pkt	270 Pkt	77 Pcnt
1750178178	13.2 Volt	970 Pkt	270 Pkt	77 Pcnt
1750177878	13.05 Volt	990 Pkt	270 Pkt	77 Pcnt
1750177578	13.28 Volt	990 Pkt	260 Pkt	76 Pcnt
1750177578	13.28 Volt	990 Pkt	260 Pkt	76 Pcnt
1750177278	13.2 Volt	1010 Pkt	270 Pkt	76 Pcnt
1750176978	13.05 Volt	1030 Pkt	280 Pkt	75 Pcnt
1750176678	13.2 Volt	1050 Pkt	280 Pkt	75 Pcnt
1750176378	13.2 Volt	1080 Pkt	290 Pkt	75 Pcnt
1750176378	13.2 Volt	1080 Pkt	290 Pkt	75 Pcnt
1750176078	13.35 Volt	1090 Pkt	300 Pkt	75 Pcnt
1750175778	13.28 Volt	1050 Pkt	290 Pkt	75 Pcnt
1750175478	13.13 Volt	1050 Pkt	300 Pkt	74 Pcnt
1750175180	13.2 Volt	1060 Pkt	310 Pkt	74 Pcnt
1750175178	13.2 Volt	1060 Pkt	310 Pkt	74 Pcnt
1750174878	13.2 Volt	1060 Pkt	310 Pkt	74 Pcnt
1750174578	13.13 Volt	1050 Pkt	310 Pkt	73 Pcnt
1750174578	13.13 Volt	1050 Pkt	310 Pkt	73 Pcnt
1750174278	13.2 Volt	1070 Pkt	310 Pkt	73 Pcnt
1750173978	13.13 Volt	1060 Pkt	310 Pkt	72 Pcnt
1750173678	13.13 Volt	1050 Pkt	310 Pkt	71 Pcnt
1750173379	13.13 Volt	1050 Pkt	310 Pkt	71 Pcnt
1750173378	13.13 Volt	1050 Pkt	310 Pkt	71 Pcnt
1750173078	13.13 Volt	1030 Pkt	310 Pkt	70 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)