APRS Track Direct

My position About ☰

reset

HS4POQ-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4POQ-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TxTraffic*	RSSI*	Voltage*
1750112776	0 Pkt	-50 dBm	0.08 V
1750110967	1 Pkt	-49 dBm	0.1 V
1750109156	0 Pkt	-49 dBm	0.1 V
1750107346	0 Pkt	-48 dBm	0.14 V
1750105536	0 Pkt	-49 dBm	0.08 V
1750103726	0 Pkt	-49 dBm	0.1 V
1750101839	0 Pkt	-44 dBm	0.12 V
1750100029	0 Pkt	-45 dBm	0.1 V
1750098219	0 Pkt	-44 dBm	0.12 V
1750096409	1 Pkt	-45 dBm	0.12 V
1750094598	0 Pkt	-45 dBm	0.06 V
1750092788	1 Pkt	-44 dBm	0.1 V
1750090978	0 Pkt	-44 dBm	0.14 V
1750089168	0 Pkt	-48 dBm	0.14 V
1750087358	5 Pkt	-49 dBm	0.12 V
1750085548	0 Pkt	-51 dBm	0.1 V
1750083738	0 Pkt	-45 dBm	0.14 V
1750081928	0 Pkt	-48 dBm	0.14 V
1750080044	0 Pkt	-50 dBm	0.1 V
1750078234	4 Pkt	-51 dBm	0.14 V
1750076424	9 Pkt	-52 dBm	0.12 V
1750074614	0 Pkt	-50 dBm	0.12 V
1750072804	0 Pkt	-51 dBm	0.1 V
1750070994	0 Pkt	-50 dBm	0.12 V
1750069184	1 Pkt	-51 dBm	0.12 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)