APRS Track Direct

My position About ☰

reset

EA4URA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA4URA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1750246595	13.88 Volt	100 Pkt	40 Pkt	97 Pcnt
1750242992	13.88 Volt	190 Pkt	110 Pkt	94 Pcnt
1750239388	13.95 Volt	180 Pkt	110 Pkt	89 Pcnt
1750235785	14.33 Volt	290 Pkt	150 Pkt	80 Pcnt
1750232181	14.33 Volt	150 Pkt	90 Pkt	89 Pcnt
1750228578	14.33 Volt	80 Pkt	40 Pkt	92 Pcnt
1750224974	13.2 Volt	70 Pkt	30 Pkt	98 Pcnt
1750221371	12.98 Volt	70 Pkt	40 Pkt	97 Pcnt
1750217767	12.98 Volt	60 Pkt	30 Pkt	88 Pcnt
1750214164	12.98 Volt	60 Pkt	30 Pkt	92 Pcnt
1750210560	13.05 Volt	60 Pkt	40 Pkt	85 Pcnt
1750206957	13.05 Volt	150 Pkt	120 Pkt	85 Pcnt
1750203353	13.05 Volt	50 Pkt	40 Pkt	90 Pcnt
1750199750	13.05 Volt	60 Pkt	40 Pkt	84 Pcnt
1750196146	13.05 Volt	50 Pkt	30 Pkt	96 Pcnt
1750192543	13.05 Volt	60 Pkt	30 Pkt	92 Pcnt
1750188939	13.28 Volt	80 Pkt	40 Pkt	74 Pcnt
1750185336	13.8 Volt	100 Pkt	50 Pkt	92 Pcnt
1750181732	13.8 Volt	100 Pkt	50 Pkt	87 Pcnt
1750178129	13.8 Volt	100 Pkt	40 Pkt	98 Pcnt
1750174525	13.88 Volt	90 Pkt	40 Pkt	94 Pcnt
1750170922	13.88 Volt	100 Pkt	50 Pkt	96 Pcnt
1750167318	13.8 Volt	90 Pkt	40 Pkt	95 Pcnt
1750163715	13.88 Volt	90 Pkt	40 Pkt	97 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

I2: 0, 9.76, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)