APRS Track Direct

My position About ☰

reset

CHKWLA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CHKWLA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1762318022	13.95 Volt	420 Pkt	60 Pkt	66 Pcnt
1762316222	13.8 Volt	420 Pkt	80 Pkt	63 Pcnt
1762314422	13.95 Volt	390 Pkt	80 Pkt	63 Pcnt
1762312622	13.95 Volt	360 Pkt	70 Pkt	61 Pcnt
1762310822	13.95 Volt	330 Pkt	70 Pkt	58 Pcnt
1762309022	13.95 Volt	340 Pkt	70 Pkt	60 Pcnt
1762307222	13.95 Volt	350 Pkt	70 Pkt	68 Pcnt
1762305422	13.95 Volt	340 Pkt	60 Pkt	68 Pcnt
1762303622	13.95 Volt	350 Pkt	50 Pkt	69 Pcnt
1762301822	13.88 Volt	340 Pkt	60 Pkt	71 Pcnt
1762300022	13.95 Volt	360 Pkt	60 Pkt	69 Pcnt
1762298222	13.95 Volt	440 Pkt	80 Pkt	71 Pcnt
1762296422	13.95 Volt	400 Pkt	70 Pkt	69 Pcnt
1762294622	13.95 Volt	370 Pkt	80 Pkt	68 Pcnt
1762292822	13.95 Volt	380 Pkt	80 Pkt	67 Pcnt
1762291022	13.95 Volt	370 Pkt	80 Pkt	64 Pcnt
1762289223	13.95 Volt	360 Pkt	70 Pkt	62 Pcnt
1762287423	13.88 Volt	380 Pkt	60 Pkt	60 Pcnt
1762285623	13.95 Volt	450 Pkt	80 Pkt	57 Pcnt
1762283823	13.95 Volt	480 Pkt	110 Pkt	59 Pcnt
1762282023	13.95 Volt	480 Pkt	110 Pkt	68 Pcnt
1762280223	13.95 Volt	490 Pkt	120 Pkt	70 Pcnt
1762278423	13.95 Volt	510 Pkt	140 Pkt	67 Pcnt
1762276623	13.95 Volt	500 Pkt	150 Pkt	65 Pcnt
1762274823	13.95 Volt	510 Pkt	180 Pkt	70 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)