This is the latest recevied telemetry packets stored in our database for station/object W6BSD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732290771 | 31.48 | 1.85 | 93 | 0 | 0 |
| 1732290171 | 31.48 | 1.83 | 93 | 0 | 0 |
| 1732289571 | 30.94 | 1.75 | 94 | 0 | 0 |
| 1732288971 | 30.4 | 1.46 | 94 | 0 | 0 |
| 1732288371 | 29.86 | 0.08 | 95 | 0 | 0 |
| 1732287770 | 29.86 | 0.2 | 96 | 0 | 0 |
| 1732287170 | 30.4 | 0.42 | 96 | 0 | 0 |
| 1732286570 | 29.86 | 0.13 | 96 | 0 | 0 |
| 1732285970 | 29.86 | 0.24 | 97 | 0 | 0 |
| 1732285370 | 29.32 | 0.19 | 97 | 0 | 0 |
| 1732284770 | 29.86 | 0.14 | 97 | 0 | 0 |
| 1732284170 | 29.32 | 0.2 | 98 | 0 | 0 |
| 1732283570 | 29.32 | 0.15 | 99 | 0 | 0 |
| 1732282969 | 29.86 | 0.21 | 100 | 0 | 0 |
| 1732282369 | 29.32 | 0.2 | 100 | 0 | 0 |
| 1732281769 | 29.32 | 0.18 | 100 | 0 | 0 |
| 1732281169 | 29.86 | 0.14 | 98 | 0 | 0 |
| 1732280569 | 29.32 | 0.31 | 98 | 0 | 0 |
| 1732279969 | 29.32 | 0.13 | 100 | 0 | 0 |
| 1732279369 | 29.86 | 0.17 | 100 | 0 | 0 |
| 1732278769 | 29.86 | 0.34 | 101 | 0 | 0 |
| 1732277566 | 29.32 | 0.1 | 88 | 0 | 0 |
| 1732276966 | 29.86 | 0.25 | 88 | 0 | 0 |
| 1732276366 | 29.86 | 0.21 | 88 | 0 | 0 |
| 1732275766 | 29.86 | 0.33 | 88 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)