This is the latest recevied telemetry packets stored in our database for station/object S59DEM-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753713078 | 4.18 VDC | 12.5 VDC | 0 | 0 | 0 |
| 1753712178 | 4.18 VDC | 12.92 VDC | 0 | 0 | 0 |
| 1753711278 | 4.18 VDC | 12.82 VDC | 0 | 0 | 0 |
| 1753710377 | 4.18 VDC | 12.72 VDC | 0 | 0 | 0 |
| 1753709477 | 4.17 VDC | 12.48 VDC | 0 | 0 | 0 |
| 1753708577 | 4.18 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1753707676 | 4.17 VDC | 13.04 VDC | 0 | 0 | 0 |
| 1753706773 | 4.18 VDC | 12.92 VDC | 0 | 0 | 0 |
| 1753705873 | 4.18 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1753704972 | 4.17 VDC | 12.34 VDC | 0 | 0 | 0 |
| 1753704072 | 4.17 VDC | 12.28 VDC | 0 | 0 | 0 |
| 1753703172 | 4.18 VDC | 12.14 VDC | 0 | 0 | 0 |
| 1753702272 | 4.18 VDC | 12.12 VDC | 0 | 0 | 0 |
| 1753701372 | 4.17 VDC | 11.86 VDC | 0 | 0 | 0 |
| 1753700472 | 4.17 VDC | 12.3 VDC | 0 | 0 | 0 |
| 1753699572 | 4.18 VDC | 12.38 VDC | 0 | 0 | 0 |
| 1753698672 | 4.17 VDC | 12.24 VDC | 0 | 0 | 0 |
| 1753697771 | 4.18 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1753696870 | 4.17 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1753695976 | 4.17 VDC | 12.44 VDC | 0 | 0 | 0 |
| 1753695076 | 4.17 VDC | 12.36 VDC | 0 | 0 | 0 |
| 1753694176 | 4.17 VDC | 12.2 VDC | 0 | 0 | 0 |
| 1753693276 | 4.17 VDC | 12.5 VDC | 0 | 0 | 0 |
| 1753692376 | 4.17 VDC | 12.56 VDC | 0 | 0 | 0 |
| 1753691476 | 4.17 VDC | 12.56 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)