This is the latest recevied telemetry packets stored in our database for station/object PU2XTC-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Load* | RAM* | RSSI* | Ping* |
|---|---|---|---|---|---|
| 1778022006 | 63 deg.C | 0.38 val | 40 % | -53 dBm | 12 ms |
| 1778021706 | 63 deg.C | 0.6 val | 41 % | -30 dBm | 0 ms |
| 1778021106 | 63 deg.C | 0.42 val | 40 % | -29 dBm | 5 ms |
| 1778020806 | 63 deg.C | 0.38 val | 40 % | -39 dBm | 13 ms |
| 1778020506 | 63 deg.C | 0.47 val | 39 % | -43 dBm | 15 ms |
| 1778020216 | 63 deg.C | 0.43 val | 39 % | -39 dBm | 8 ms |
| 1778019906 | 63 deg.C | 0.27 val | 40 % | -27 dBm | 5 ms |
| 1778019606 | 63 deg.C | 0.46 val | 39 % | -37 dBm | 20 ms |
| 1778019306 | 63 deg.C | 0.19 val | 39 % | -34 dBm | 19 ms |
| 1778019006 | 63 deg.C | 0.07 val | 39 % | -47 dBm | 19 ms |
| 1778018706 | 63 deg.C | 0.6 val | 40 % | -39 dBm | 4 ms |
| 1778018406 | 63 deg.C | 0.59 val | 40 % | -35 dBm | 13 ms |
| 1778018106 | 63 deg.C | 0.42 val | 39 % | -30 dBm | 11 ms |
| 1778017806 | 63 deg.C | 0.34 val | 39 % | -40 dBm | 14 ms |
| 1778017506 | 63 deg.C | 0.17 val | 40 % | -34 dBm | 185 ms |
| 1778017206 | 63 deg.C | 0.03 val | 40 % | -47 dBm | 10 ms |
| 1778016906 | 63 deg.C | 0.39 val | 40 % | -51 dBm | 6 ms |
| 1778016606 | 63 deg.C | 0.14 val | 39 % | -35 dBm | 12 ms |
| 1778016306 | 63 deg.C | 0.15 val | 40 % | -34 dBm | 5 ms |
| 1778016006 | 63 deg.C | 0.25 val | 40 % | -32 dBm | 9 ms |
| 1778015706 | 63 deg.C | 0.48 val | 40 % | -35 dBm | 8 ms |
| 1778015406 | 63 deg.C | 0.34 val | 39 % | -37 dBm | 9 ms |
| 1778015106 | 63 deg.C | 0.69 val | 39 % | -29 dBm | 12 ms |
| 1778014806 | 63 deg.C | 0.4 val | 40 % | -47 dBm | 13 ms |
| 1778014506 | 63 deg.C | 0.31 val | 40 % | -45 dBm | 11 ms |
*Used Equation Coefficients:
Temp: 0, 1, 0
Load: 0, 0.01, 0
RAM: 0, 1, 0
RSSI: 0, -1, 0
Ping: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)