This is the latest recevied telemetry packets stored in our database for station/object YO3KXL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | T_ext* | T_int* | T_rad* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790671277 | 22 C | 24.6 C | 30.9 C | 0 | 0 |
| 1790670674 | 22.2 C | 24.4 C | 30.6 C | 0 | 0 |
| 1790670075 | 21.6 C | 23.8 C | 30.6 C | 0 | 0 |
| 1790669478 | 21.1 C | 23.7 C | 30.9 C | 0 | 0 |
| 1790668875 | 21.2 C | 23.6 C | 32.2 C | 0 | 0 |
| 1790668275 | 21.1 C | 23.4 C | 30.1 C | 0 | 0 |
| 1790667677 | 21.2 C | 23.3 C | 30.2 C | 0 | 0 |
| 1790667075 | 21.1 C | 23.1 C | 29.9 C | 0 | 0 |
| 1790666475 | 20.9 C | 22.9 C | 30.1 C | 0 | 0 |
| 1790665878 | 20.9 C | 22.7 C | 30.6 C | 0 | 0 |
| 1790665275 | 20.4 C | 22.3 C | 32.1 C | 0 | 0 |
| 1790664675 | 19.9 C | 21.9 C | 31.5 C | 0 | 0 |
| 1790664077 | 19.6 C | 21.7 C | 33.2 C | 0 | 0 |
| 1790663475 | 19.4 C | 21.2 C | 36.4 C | 0 | 0 |
| 1790662875 | 19.1 C | 21 C | 27.8 C | 0 | 0 |
| 1790662278 | 18.8 C | 20.3 C | 27.5 C | 0 | 0 |
| 1790661675 | 17.3 C | 19.8 C | 28.6 C | 0 | 0 |
| 1790661075 | 17 C | 19.7 C | 27.1 C | 0 | 0 |
| 1790660478 | 17.1 C | 19.6 C | 27.2 C | 0 | 0 |
| 1790659875 | 16.9 C | 19.4 C | 26.8 C | 0 | 0 |
| 1790659275 | 16.8 C | 19.2 C | 26.9 C | 0 | 0 |
| 1790658677 | 16.7 C | 19.2 C | 27.3 C | 0 | 0 |
| 1790658075 | 16.4 C | 19 C | 28.8 C | 0 | 0 |
| 1790657475 | 16.3 C | 18.9 C | 27.7 C | 0 | 0 |
| 1790656878 | 16.2 C | 18.7 C | 27 C | 0 | 0 |
*Used Equation Coefficients:
T_ext: 0, 1, -100
T_int: 0, 1, -100
T_rad: 0, 1, -100
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)