APRS Track Direct

My position About ☰

reset

OK1KZE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1KZE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732270260	13.5 Volt	510 Pkt	140 Pkt	71 Pcnt
1732269961	13.5 Volt	510 Pkt	140 Pkt	71 Pcnt
1732269960	13.5 Volt	510 Pkt	140 Pkt	71 Pcnt
1732269660	13.5 Volt	490 Pkt	140 Pkt	69 Pcnt
1732269360	13.5 Volt	510 Pkt	140 Pkt	69 Pcnt
1732269061	13.5 Volt	510 Pkt	140 Pkt	69 Pcnt
1732269060	13.5 Volt	510 Pkt	140 Pkt	69 Pcnt
1732268760	13.5 Volt	520 Pkt	140 Pkt	69 Pcnt
1732268460	13.5 Volt	530 Pkt	150 Pkt	70 Pcnt
1732268161	13.5 Volt	530 Pkt	150 Pkt	70 Pcnt
1732268160	13.5 Volt	530 Pkt	150 Pkt	70 Pcnt
1732267860	13.5 Volt	540 Pkt	150 Pkt	71 Pcnt
1732267560	13.5 Volt	550 Pkt	150 Pkt	72 Pcnt
1732267261	13.5 Volt	550 Pkt	150 Pkt	71 Pcnt
1732267260	13.5 Volt	550 Pkt	150 Pkt	71 Pcnt
1732266960	13.5 Volt	560 Pkt	150 Pkt	71 Pcnt
1732266660	13.5 Volt	570 Pkt	150 Pkt	71 Pcnt
1732266361	13.58 Volt	560 Pkt	150 Pkt	72 Pcnt
1732266360	13.58 Volt	560 Pkt	150 Pkt	72 Pcnt
1732266060	13.5 Volt	580 Pkt	150 Pkt	72 Pcnt
1732265760	13.5 Volt	580 Pkt	160 Pkt	73 Pcnt
1732265461	13.5 Volt	580 Pkt	150 Pkt	73 Pcnt
1732265460	13.5 Volt	580 Pkt	150 Pkt	73 Pcnt
1732265160	13.5 Volt	580 Pkt	150 Pkt	73 Pcnt
1732264860	13.5 Volt	560 Pkt	150 Pkt	72 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)