APRS Track Direct

My position About ☰

reset

N2RWE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N2RWE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1754222344	14.18 Volt	100 Pkt	54 Pcnt	22.5 C
1754222044	14.18 Volt	90 Pkt	53 Pcnt	22.5 C
1754221744	14.18 Volt	90 Pkt	52 Pcnt	22.5 C
1754221444	14.18 Volt	90 Pkt	48 Pcnt	22.5 C
1754221144	14.18 Volt	100 Pkt	49 Pcnt	22.5 C
1754220844	14.18 Volt	100 Pkt	49 Pcnt	22.5 C
1754220544	14.18 Volt	110 Pkt	51 Pcnt	22.5 C
1754220244	14.18 Volt	120 Pkt	51 Pcnt	22.5 C
1754219944	14.18 Volt	120 Pkt	50 Pcnt	22.5 C
1754219644	14.18 Volt	120 Pkt	50 Pcnt	22.5 C
1754219344	14.18 Volt	110 Pkt	49 Pcnt	22 C
1754219044	14.18 Volt	110 Pkt	49 Pcnt	22 C
1754218744	14.18 Volt	120 Pkt	50 Pcnt	22.5 C
1754218444	14.18 Volt	120 Pkt	51 Pcnt	22 C
1754218144	14.18 Volt	120 Pkt	52 Pcnt	22.5 C
1754217844	14.18 Volt	120 Pkt	50 Pcnt	22.5 C
1754217544	14.18 Volt	120 Pkt	50 Pcnt	22.5 C
1754217244	14.18 Volt	110 Pkt	49 Pcnt	22.5 C
1754216944	14.18 Volt	110 Pkt	47 Pcnt	22.5 C
1754216644	14.18 Volt	100 Pkt	47 Pcnt	22.5 C
1754216344	14.18 Volt	100 Pkt	47 Pcnt	22.5 C
1754216044	14.18 Volt	110 Pkt	48 Pcnt	22.5 C
1754215744	14.18 Volt	110 Pkt	49 Pcnt	22.5 C
1754215444	14.18 Volt	110 Pkt	48 Pcnt	22.5 C
1754215144	14.18 Volt	110 Pkt	46 Pcnt	22.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)