APRS Track Direct

My position About ☰

reset

NI4CE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NI4CE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	Rx1h*	Dg1h*	Eff1h*
1744920069	14.33 Volt	22.5 C	770 Pkt	280 Pkt	63 Pcnt
1744919769	14.33 Volt	22.5 C	760 Pkt	280 Pkt	63 Pcnt
1744919769	14.33 Volt	22.5 C	760 Pkt	280 Pkt	63 Pcnt
1744919469	14.33 Volt	22.5 C	760 Pkt	280 Pkt	64 Pcnt
1744919170	14.33 Volt	22.5 C	760 Pkt	280 Pkt	64 Pcnt
1744919169	14.33 Volt	22.5 C	760 Pkt	280 Pkt	64 Pcnt
1744918869	14.33 Volt	22.5 C	750 Pkt	280 Pkt	65 Pcnt
1744918570	14.33 Volt	22.5 C	740 Pkt	270 Pkt	64 Pcnt
1744918569	14.33 Volt	22.5 C	740 Pkt	270 Pkt	64 Pcnt
1744918269	14.18 Volt	22.5 C	750 Pkt	270 Pkt	64 Pcnt
1744917970	14.33 Volt	22.5 C	750 Pkt	270 Pkt	64 Pcnt
1744917969	14.33 Volt	22.5 C	750 Pkt	270 Pkt	64 Pcnt
1744917669	14.33 Volt	22.5 C	730 Pkt	270 Pkt	63 Pcnt
1744917370	14.33 Volt	22.5 C	730 Pkt	270 Pkt	64 Pcnt
1744917369	14.33 Volt	22.5 C	730 Pkt	270 Pkt	64 Pcnt
1744917069	14.33 Volt	22.5 C	730 Pkt	270 Pkt	63 Pcnt
1744916770	14.33 Volt	22.5 C	720 Pkt	260 Pkt	64 Pcnt
1744916769	14.33 Volt	22.5 C	720 Pkt	260 Pkt	64 Pcnt
1744916469	14.33 Volt	22.5 C	720 Pkt	270 Pkt	63 Pcnt
1744916170	14.33 Volt	22.5 C	730 Pkt	260 Pkt	63 Pcnt
1744916169	14.33 Volt	22.5 C	730 Pkt	260 Pkt	63 Pcnt
1744915869	14.33 Volt	22.5 C	710 Pkt	260 Pkt	61 Pcnt
1744915570	14.33 Volt	22.5 C	690 Pkt	250 Pkt	61 Pcnt
1744915569	14.33 Volt	22.5 C	690 Pkt	250 Pkt	61 Pcnt
1744915269	14.33 Volt	22.5 C	680 Pkt	250 Pkt	60 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)