APRS Track Direct

My position About ☰

reset

HS4NIY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4NIY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1786738278	2 ug/m3	134 ug/m3	135 ug/m3	-82 dBm	0.14 V
1786737589	2 ug/m3	139 ug/m3	139 ug/m3	-81 dBm	0.14 V
1786736900	3 ug/m3	137 ug/m3	139 ug/m3	-81 dBm	0.14 V
1786736211	2 ug/m3	136 ug/m3	136 ug/m3	-82 dBm	0.14 V
1786735523	2 ug/m3	134 ug/m3	134 ug/m3	-81 dBm	0.14 V
1786734512	1 ug/m3	143 ug/m3	143 ug/m3	-81 dBm	0.14 V
1786733988	3 ug/m3	138 ug/m3	138 ug/m3	-80 dBm	0.14 V
1786733298	3 ug/m3	136 ug/m3	136 ug/m3	-81 dBm	0.14 V
1786732610	3 ug/m3	136 ug/m3	136 ug/m3	-81 dBm	0.14 V
1786731921	3 ug/m3	138 ug/m3	138 ug/m3	-81 dBm	0.14 V
1786731232	2 ug/m3	138 ug/m3	138 ug/m3	-83 dBm	0.14 V
1786730543	3 ug/m3	136 ug/m3	136 ug/m3	-79 dBm	0.14 V
1786729959	3 ug/m3	138 ug/m3	138 ug/m3	-80 dBm	0.14 V
1786729271	4 ug/m3	139 ug/m3	141 ug/m3	-81 dBm	0.14 V
1786728581	2 ug/m3	135 ug/m3	135 ug/m3	-80 dBm	0.14 V
1786727893	3 ug/m3	139 ug/m3	139 ug/m3	-81 dBm	0.14 V
1786727204	3 ug/m3	130 ug/m3	131 ug/m3	-80 dBm	0.14 V
1786726515	3 ug/m3	141 ug/m3	141 ug/m3	-79 dBm	0.14 V
1786726010	2 ug/m3	137 ug/m3	137 ug/m3	-82 dBm	0.14 V
1786725320	3 ug/m3	138 ug/m3	138 ug/m3	-83 dBm	0.14 V
1786724631	2 ug/m3	136 ug/m3	137 ug/m3	-81 dBm	0.14 V
1786723942	2 ug/m3	138 ug/m3	138 ug/m3	-81 dBm	0.14 V
1786723254	2 ug/m3	139 ug/m3	141 ug/m3	-82 dBm	0.14 V
1786722565	3 ug/m3	139 ug/m3	139 ug/m3	-82 dBm	0.14 V
1786721876	2 ug/m3	136 ug/m3	136 ug/m3	-83 dBm	0.14 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)