APRS Track Direct

My position About ☰

reset

E27IHO-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E27IHO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1836274529	0 Pkt	0 Pkt	-53 dBm	13.39 V
1836274403	2 Pkt	0 Pkt	-58 dBm	13.39 V
1836273905	0 Pkt	0 Pkt	-51 dBm	13.37 V
1766171599	1 Pkt	0 Pkt	-39 dBm	13.31 V
1766170975	1 Pkt	0 Pkt	-38 dBm	13.19 V
1766170351	0 Pkt	0 Pkt	-38 dBm	13.21 V
1766169727	2 Pkt	0 Pkt	-38 dBm	13.23 V
1766169103	0 Pkt	0 Pkt	-41 dBm	13.21 V
1766168479	1 Pkt	0 Pkt	-41 dBm	13.19 V
1766167856	1 Pkt	0 Pkt	-41 dBm	13.31 V
1766167231	1 Pkt	0 Pkt	-41 dBm	13.21 V
1766166608	0 Pkt	0 Pkt	-39 dBm	13.21 V
1766165984	2 Pkt	1 Pkt	-39 dBm	13.23 V
1766165359	0 Pkt	2 Pkt	-38 dBm	13.19 V
1766164735	1 Pkt	0 Pkt	-39 dBm	13.21 V
1766164111	1 Pkt	0 Pkt	-41 dBm	13.23 V
1766163487	1 Pkt	0 Pkt	-38 dBm	13.23 V
1766162863	1 Pkt	0 Pkt	-40 dBm	13.21 V
1766162239	1 Pkt	1 Pkt	-41 dBm	13.21 V
1766161615	0 Pkt	0 Pkt	-40 dBm	13.23 V
1766160991	1 Pkt	0 Pkt	-38 dBm	13.21 V
1766160367	1 Pkt	0 Pkt	-40 dBm	13.19 V
1766159744	0 Pkt	0 Pkt	-40 dBm	13.21 V
1766159120	2 Pkt	4 Pkt	-39 dBm	13.21 V
1766158496	0 Pkt	0 Pkt	-39 dBm	13.31 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)