This is the latest recevied telemetry packets stored in our database for station/object SP1ZS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794909350 | 424 Count | 711 Count | 292 Count | 3.98 VDC | 0 VDC |
| 1794908749 | 418 Count | 703 Count | 289 Count | 3.98 VDC | 0 VDC |
| 1794908147 | 412 Count | 693 Count | 285 Count | 3.98 VDC | 0 VDC |
| 1794907547 | 405 Count | 678 Count | 280 Count | 3.98 VDC | 0 VDC |
| 1794906946 | 398 Count | 667 Count | 276 Count | 3.98 VDC | 0 VDC |
| 1794906346 | 391 Count | 653 Count | 271 Count | 3.98 VDC | 0 VDC |
| 1794905745 | 383 Count | 638 Count | 266 Count | 3.98 VDC | 0 VDC |
| 1794905144 | 375 Count | 625 Count | 260 Count | 3.98 VDC | 0 VDC |
| 1794904544 | 367 Count | 612 Count | 255 Count | 3.98 VDC | 0 VDC |
| 1794903943 | 361 Count | 598 Count | 251 Count | 3.98 VDC | 0 VDC |
| 1794903343 | 352 Count | 585 Count | 244 Count | 3.99 VDC | 0 VDC |
| 1794902741 | 345 Count | 574 Count | 240 Count | 3.99 VDC | 0 VDC |
| 1794902141 | 338 Count | 565 Count | 235 Count | 3.99 VDC | 0 VDC |
| 1794901539 | 331 Count | 555 Count | 231 Count | 3.99 VDC | 0 VDC |
| 1794900939 | 325 Count | 546 Count | 227 Count | 3.99 VDC | 0 VDC |
| 1794900338 | 316 Count | 533 Count | 221 Count | 3.99 VDC | 0 VDC |
| 1794899738 | 308 Count | 522 Count | 215 Count | 3.99 VDC | 0 VDC |
| 1794899137 | 300 Count | 511 Count | 209 Count | 3.98 VDC | 0 VDC |
| 1794898536 | 291 Count | 493 Count | 203 Count | 3.99 VDC | 0 VDC |
| 1794897936 | 284 Count | 469 Count | 198 Count | 3.98 VDC | 0 VDC |
| 1794897335 | 276 Count | 454 Count | 193 Count | 3.98 VDC | 0 VDC |
| 1794896734 | 270 Count | 442 Count | 189 Count | 3.98 VDC | 0 VDC |
| 1794896133 | 262 Count | 431 Count | 184 Count | 3.98 VDC | 0 VDC |
| 1794895532 | 253 Count | 418 Count | 177 Count | 3.98 VDC | 0 VDC |
| 1794894931 | 247 Count | 407 Count | 173 Count | 3.97 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)