APRS Track Direct

My position About ☰

reset

9W4GAW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W4GAW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	TxTraffic*	RSSI*	Voltage*
1758181386	5 Pkt	-64 dBm	15.2 V
1758179560	9 Pkt	-69 dBm	15.09 V
1758177734	12 Pkt	-70 dBm	11.12 V
1758175909	8 Pkt	-67 dBm	14.56 V
1758174083	5 Pkt	-71 dBm	6.79 V
1758172258	22 Pkt	-73 dBm	4.43 V
1758170432	0 Pkt	-73 dBm	7.46 V
1758168542	9 Pkt	-71 dBm	7.77 V
1758166716	20 Pkt	-72 dBm	8.53 V
1758164891	5 Pkt	-71 dBm	7.49 V
1758163065	11 Pkt	-70 dBm	6.75 V
1758161240	17 Pkt	-73 dBm	5.82 V
1758159414	16 Pkt	-68 dBm	13.95 V
1758157588	25 Pkt	-61 dBm	11.09 V
1758155761	0 Pkt	-61 dBm	10.58 V
1758154794	33 Pkt	-64 dBm	11.46 V
1758152966	0 Pkt	-68 dBm	10.34 V
1758152062	5 Pkt	-71 dBm	10.27 V
1758150236	0 Pkt	-66 dBm	1.62 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)