APRS Track Direct

My position About ☰

reset

N1DTA-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N1DTA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786727717	13.58 Volt	1150 Pkt	300 Pkt	81 Pcnt
1786727715	13.58 Volt	1150 Pkt	300 Pkt	81 Pcnt
1786727415	13.5 Volt	1140 Pkt	290 Pkt	80 Pcnt
1786727126	13.5 Volt	1140 Pkt	290 Pkt	81 Pcnt
1786727115	13.5 Volt	1140 Pkt	290 Pkt	81 Pcnt
1786726815	13.88 Volt	1140 Pkt	290 Pkt	81 Pcnt
1786726519	13.35 Volt	1170 Pkt	290 Pkt	81 Pcnt
1786726515	13.35 Volt	1170 Pkt	290 Pkt	81 Pcnt
1786726215	13.73 Volt	1180 Pkt	290 Pkt	81 Pcnt
1786725920	13.88 Volt	1180 Pkt	290 Pkt	81 Pcnt
1786725915	13.88 Volt	1180 Pkt	290 Pkt	81 Pcnt
1786725615	13.95 Volt	1190 Pkt	280 Pkt	81 Pcnt
1786725317	13.5 Volt	1180 Pkt	280 Pkt	80 Pcnt
1786725315	13.5 Volt	1180 Pkt	280 Pkt	80 Pcnt
1786725015	13.95 Volt	1220 Pkt	290 Pkt	80 Pcnt
1786724743	13.43 Volt	1190 Pkt	290 Pkt	81 Pcnt
1786724715	13.43 Volt	1190 Pkt	290 Pkt	81 Pcnt
1786724415	13.5 Volt	1190 Pkt	290 Pkt	81 Pcnt
1786724116	13.58 Volt	1210 Pkt	280 Pkt	81 Pcnt
1786724115	13.58 Volt	1210 Pkt	280 Pkt	81 Pcnt
1786723815	13.43 Volt	1210 Pkt	290 Pkt	81 Pcnt
1786723518	13.88 Volt	1230 Pkt	290 Pkt	80 Pcnt
1786723515	13.88 Volt	1230 Pkt	290 Pkt	80 Pcnt
1786723215	13.73 Volt	1270 Pkt	300 Pkt	79 Pcnt
1786722918	13.8 Volt	1290 Pkt	300 Pkt	79 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)