This is the latest recevied telemetry packets stored in our database for station/object DL1TK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754714333 | 25.3 deg C | 47.3 % | 1021.7 hPa | 0 | 0 |
| 1754713433 | 25.7 deg C | 46.8 % | 1018.7 hPa | 0 | 0 |
| 1754712533 | 25.9 deg C | 46.7 % | 1020.8 hPa | 0 | 0 |
| 1754711633 | 25.9 deg C | 46.7 % | 1020.2 hPa | 0 | 0 |
| 1754710733 | 25.8 deg C | 46.8 % | 1019.6 hPa | 0 | 0 |
| 1754709833 | 25.9 deg C | 46.7 % | 1019.8 hPa | 0 | 0 |
| 1754708933 | 25.9 deg C | 46.6 % | 1021.3 hPa | 0 | 0 |
| 1754708033 | 26 deg C | 46.5 % | 1021.2 hPa | 0 | 0 |
| 1754707133 | 26.1 deg C | 46.5 % | 1021.8 hPa | 0 | 0 |
| 1754706233 | 26.1 deg C | 46.4 % | 1020.9 hPa | 0 | 0 |
| 1754705333 | 26.2 deg C | 46.3 % | 1021.4 hPa | 0 | 0 |
| 1754704432 | 26.3 deg C | 46.2 % | 1022.3 hPa | 0 | 0 |
| 1754703532 | 26.3 deg C | 46.1 % | 1019.5 hPa | 0 | 0 |
| 1754702632 | 26.4 deg C | 46 % | 1020.3 hPa | 0 | 0 |
| 1754701732 | 26.4 deg C | 46 % | 1020.7 hPa | 0 | 0 |
| 1754700832 | 26.5 deg C | 46 % | 1020.3 hPa | 0 | 0 |
| 1754699932 | 26.5 deg C | 45.8 % | 1019.2 hPa | 0 | 0 |
| 1754699032 | 26.5 deg C | 45.8 % | 1020.2 hPa | 0 | 0 |
| 1754698132 | 26.5 deg C | 45.8 % | 1021.9 hPa | 0 | 0 |
| 1754697232 | 26.6 deg C | 45.8 % | 1019.7 hPa | 0 | 0 |
| 1754696331 | 26.6 deg C | 45.7 % | 1020.6 hPa | 0 | 0 |
| 1754695431 | 26.7 deg C | 45.5 % | 1020.5 hPa | 0 | 0 |
| 1754694531 | 26.7 deg C | 45.2 % | 1020.3 hPa | 0 | 0 |
| 1754693631 | 26.7 deg C | 45 % | 1018 hPa | 0 | 0 |
| 1754692731 | 26.8 deg C | 44.9 % | 1020.7 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)