APRS Track Direct

My position About ☰

reset

YB0OSU-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB0OSU-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1758199852	30 Pkt	0 Pkt	-64 dBm	13.41 V
1758198924	26 Pkt	0 Pkt	-65 dBm	13.41 V
1758197997	25 Pkt	0 Pkt	-64 dBm	13.39 V
1758197070	24 Pkt	0 Pkt	-63 dBm	13.41 V
1758196145	28 Pkt	0 Pkt	-63 dBm	13.39 V
1758195219	27 Pkt	2 Pkt	-63 dBm	13.39 V
1758194294	34 Pkt	0 Pkt	-62 dBm	13.41 V
1758193363	20 Pkt	2 Pkt	-65 dBm	13.41 V
1758192437	18 Pkt	0 Pkt	-63 dBm	13.43 V
1758191511	23 Pkt	0 Pkt	-63 dBm	13.41 V
1758190586	30 Pkt	0 Pkt	-65 dBm	13.41 V
1758189659	24 Pkt	0 Pkt	-64 dBm	13.41 V
1758188732	21 Pkt	0 Pkt	-64 dBm	13.41 V
1758187807	23 Pkt	1 Pkt	-64 dBm	13.41 V
1758186880	29 Pkt	0 Pkt	-64 dBm	13.39 V
1758185950	21 Pkt	1 Pkt	-64 dBm	13.41 V
1758185023	29 Pkt	0 Pkt	-65 dBm	13.41 V
1758184096	30 Pkt	0 Pkt	-64 dBm	13.39 V
1758183166	25 Pkt	0 Pkt	-64 dBm	13.41 V
1758182238	21 Pkt	0 Pkt	-65 dBm	13.39 V
1758181312	26 Pkt	0 Pkt	-65 dBm	13.37 V
1758180385	28 Pkt	0 Pkt	-65 dBm	13.41 V
1758179459	29 Pkt	0 Pkt	-64 dBm	13.41 V
1758178532	27 Pkt	0 Pkt	-65 dBm	13.41 V
1758177605	25 Pkt	0 Pkt	-65 dBm	13.39 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)