This is the latest recevied telemetry packets stored in our database for station/object IQ3UD-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx10m* | Rx1h* | Dg10m* | DgR* | Eff1h* |
---|---|---|---|---|---|
1745061721 | 166 Pkt | 960 Pkt | 0 Pkt | 0.06 Pcnt | 74 Pcnt |
1745061421 | 155 Pkt | 940 Pkt | 0 Pkt | 0.06 Pcnt | 74 Pcnt |
1745061120 | 159 Pkt | 950 Pkt | 0 Pkt | 0.06 Pcnt | 75 Pcnt |
1745060820 | 145 Pkt | 940 Pkt | 0 Pkt | 0.06 Pcnt | 75 Pcnt |
1745060520 | 136 Pkt | 940 Pkt | 0 Pkt | 0.06 Pcnt | 76 Pcnt |
1745060219 | 124 Pkt | 950 Pkt | 0 Pkt | 0.06 Pcnt | 76 Pcnt |
1745059919 | 130 Pkt | 950 Pkt | 0 Pkt | 0.06 Pcnt | 76 Pcnt |
1745059619 | 143 Pkt | 960 Pkt | 0 Pkt | 0.06 Pcnt | 77 Pcnt |
1745059319 | 158 Pkt | 970 Pkt | 0 Pkt | 0.06 Pcnt | 78 Pcnt |
1745059018 | 162 Pkt | 960 Pkt | 0 Pkt | 0.06 Pcnt | 77 Pcnt |
1745058718 | 148 Pkt | 950 Pkt | 0 Pkt | 0.06 Pcnt | 77 Pcnt |
1745058418 | 142 Pkt | 950 Pkt | 0 Pkt | 0.06 Pcnt | 76 Pcnt |
1745058117 | 160 Pkt | 940 Pkt | 0 Pkt | 0.06 Pcnt | 75 Pcnt |
1745057817 | 159 Pkt | 960 Pkt | 0 Pkt | 0.06 Pcnt | 77 Pcnt |
1745057517 | 144 Pkt | 960 Pkt | 0 Pkt | 0.06 Pcnt | 77 Pcnt |
1745057217 | 150 Pkt | 970 Pkt | 0 Pkt | 0.06 Pcnt | 77 Pcnt |
1745056916 | 142 Pkt | 990 Pkt | 0 Pkt | 0.06 Pcnt | 77 Pcnt |
1745056616 | 139 Pkt | 990 Pkt | 0 Pkt | 0.06 Pcnt | 76 Pcnt |
1745056316 | 144 Pkt | 1010 Pkt | 0 Pkt | 0.06 Pcnt | 76 Pcnt |
1745056015 | 132 Pkt | 1020 Pkt | 1 Pkt | 0.06 Pcnt | 76 Pcnt |
1745055715 | 136 Pkt | 1030 Pkt | 1 Pkt | 0.06 Pcnt | 77 Pcnt |
1745055415 | 146 Pkt | 1050 Pkt | 0 Pkt | 0.06 Pcnt | 78 Pcnt |
1745055115 | 147 Pkt | 1050 Pkt | 0 Pkt | 0.06 Pcnt | 78 Pcnt |
1745054814 | 160 Pkt | 1040 Pkt | 0 Pkt | 0.06 Pcnt | 80 Pcnt |
1745054514 | 177 Pkt | 1050 Pkt | 0 Pkt | 0.06 Pcnt | 80 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)