APRS Track Direct

My position About ☰

reset

WY7W Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WY7W. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1744870750	13.95 Volt	610 Pkt	20 Pkt	95 Pcnt
1744870450	13.88 Volt	610 Pkt	20 Pkt	95 Pcnt
1744870150	13.8 Volt	610 Pkt	20 Pkt	94 Pcnt
1744869850	13.95 Volt	620 Pkt	20 Pkt	94 Pcnt
1744869550	13.88 Volt	620 Pkt	20 Pkt	94 Pcnt
1744869250	13.88 Volt	600 Pkt	20 Pkt	94 Pcnt
1744868950	13.95 Volt	590 Pkt	30 Pkt	94 Pcnt
1744868650	13.88 Volt	580 Pkt	30 Pkt	93 Pcnt
1744868350	13.88 Volt	550 Pkt	30 Pkt	91 Pcnt
1744868050	13.88 Volt	520 Pkt	30 Pkt	88 Pcnt
1744867750	13.88 Volt	480 Pkt	30 Pkt	87 Pcnt
1744867450	13.88 Volt	460 Pkt	40 Pkt	84 Pcnt
1744867150	13.88 Volt	460 Pkt	40 Pkt	83 Pcnt
1744866850	13.88 Volt	480 Pkt	50 Pkt	82 Pcnt
1744866553	13.88 Volt	490 Pkt	50 Pkt	82 Pcnt
1744866550	13.88 Volt	490 Pkt	50 Pkt	82 Pcnt
1744866250	13.95 Volt	500 Pkt	50 Pkt	81 Pcnt
1744865950	13.88 Volt	500 Pkt	50 Pkt	81 Pcnt
1744865650	13.95 Volt	520 Pkt	50 Pkt	80 Pcnt
1744865350	13.95 Volt	510 Pkt	50 Pkt	80 Pcnt
1744865050	13.95 Volt	520 Pkt	50 Pkt	80 Pcnt
1744864750	13.88 Volt	550 Pkt	60 Pkt	81 Pcnt
1744864450	13.88 Volt	570 Pkt	60 Pkt	82 Pcnt
1744864150	13.8 Volt	580 Pkt	70 Pkt	83 Pcnt
1744863850	13.88 Volt	590 Pkt	70 Pkt	83 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)