APRS Track Direct

My position About ☰

reset

AE5TC-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AE5TC-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1774132022	0.17 Load	52.1 DegC	3396 Mb	383 Pkt	33 Pkt
1774131962	0.18 Load	52.58 DegC	3395 Mb	309 Pkt	34 Pkt
1774131722	0.17 Load	52.1 DegC	3392 Mb	356 Pkt	35 Pkt
1774131662	0.12 Load	52.1 DegC	3395 Mb	332 Pkt	54 Pkt
1774131603	0.09 Load	51.61 DegC	3385 Mb	265 Pkt	37 Pkt
1774131304	0.05 Load	52.1 DegC	3385 Mb	375 Pkt	40 Pkt
1774131062	0.1 Load	52.58 DegC	3384 Mb	387 Pkt	46 Pkt
1774130882	0.09 Load	52.58 DegC	3390 Mb	269 Pkt	40 Pkt
1774130703	0.11 Load	52.1 DegC	3379 Mb	402 Pkt	43 Pkt
1774130642	0.12 Load	53.07 DegC	3388 Mb	298 Pkt	39 Pkt
1774130522	0.05 Load	52.1 DegC	3384 Mb	283 Pkt	76 Pkt
1774130282	0.09 Load	52.58 DegC	3397 Mb	369 Pkt	42 Pkt
1774130223	0.1 Load	52.1 DegC	3397 Mb	288 Pkt	40 Pkt
1774130162	0.1 Load	52.1 DegC	3393 Mb	595 Pkt	44 Pkt
1774130103	0.11 Load	52.58 DegC	3387 Mb	522 Pkt	40 Pkt
1774129562	0.07 Load	52.58 DegC	3395 Mb	433 Pkt	36 Pkt
1774129502	0.06 Load	51.61 DegC	3385 Mb	532 Pkt	46 Pkt
1774129442	0.07 Load	52.58 DegC	3396 Mb	346 Pkt	38 Pkt
1774129382	0.09 Load	52.1 DegC	3396 Mb	315 Pkt	36 Pkt
1774129322	0.11 Load	52.58 DegC	3397 Mb	343 Pkt	39 Pkt
1774129262	0.1 Load	53.07 DegC	3396 Mb	335 Pkt	34 Pkt
1774129143	0.12 Load	53.07 DegC	3392 Mb	438 Pkt	41 Pkt
1774129082	0.13 Load	52.1 DegC	3397 Mb	335 Pkt	35 Pkt
1774129022	0.14 Load	51.61 DegC	3398 Mb	405 Pkt	38 Pkt
1774128962	0.06 Load	53.56 DegC	3397 Mb	371 Pkt	36 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)