APRS Track Direct

☰

reset

BV2CW-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BV2CW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*
1792161980	50.2 C	25 p	132 p	2687 p
1792160780	50.2 C	45 p	146 p	2687 p
1792159580	49.5 C	62 p	135 p	2667 p
1792158380	50.9 C	39 p	125 p	2626 p
1792157180	51.4 C	34 p	115 p	2606 p
1792155980	49.7 C	52 p	127 p	2592 p
1792154781	50.9 C	29 p	112 p	2562 p
1792153581	49.9 C	46 p	106 p	2550 p
1792152380	50.4 C	37 p	119 p	2521 p
1792151180	49.9 C	23 p	144 p	2506 p
1792149980	50.3 C	59 p	192 p	2498 p
1792148780	50.3 C	62 p	185 p	2460 p
1792147579	50.9 C	71 p	182 p	2419 p
1792146380	51.2 C	52 p	146 p	2365 p
1792145180	50.8 C	59 p	142 p	2364 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Maintained by UW0WU-1, based on APRS Track Direct