This is the latest recevied telemetry packets stored in our database for station/object VE6SKI-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753659334 | 390 | 601 | 0 | 0 | 0 |
| 1753657542 | 390 | 601 | 0 | 0 | 0 |
| 1753655749 | 390 | 600 | 0 | 0 | 0 |
| 1753652166 | 390 | 600 | 0 | 0 | 0 |
| 1753644999 | 391 | 603 | 0 | 0 | 0 |
| 1753643209 | 391 | 603 | 0 | 0 | 0 |
| 1753639624 | 392 | 602 | 0 | 0 | 0 |
| 1753637832 | 391 | 602 | 0 | 0 | 0 |
| 1753636041 | 393 | 602 | 0 | 0 | 0 |
| 1753634249 | 393 | 601 | 0 | 0 | 0 |
| 1753632457 | 393 | 601 | 0 | 0 | 0 |
| 1753627082 | 394 | 600 | 0 | 0 | 0 |
| 1753625289 | 394 | 600 | 0 | 0 | 0 |
| 1753623498 | 394 | 600 | 0 | 0 | 0 |
| 1753621706 | 394 | 600 | 0 | 0 | 0 |
| 1753619914 | 395 | 600 | 0 | 0 | 0 |
| 1753618122 | 396 | 600 | 0 | 0 | 0 |
| 1753614538 | 396 | 601 | 0 | 0 | 0 |
| 1753612746 | 396 | 601 | 0 | 0 | 0 |
| 1753610954 | 397 | 601 | 0 | 0 | 0 |
| 1753609162 | 397 | 602 | 0 | 0 | 0 |
| 1753607370 | 397 | 602 | 0 | 0 | 0 |
| 1753605579 | 398 | 602 | 0 | 0 | 0 |
| 1753601994 | 398 | 603 | 0 | 0 | 0 |
| 1753598409 | 398 | 603 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)