This is the latest recevied telemetry packets stored in our database for station/object ER-IR4ZZJ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274640 | 0 | 8 | 0 | 1 | 0 |
| 1836274490 | 0 | 8 | 0 | 1 | 0 |
| 1836274040 | 0 | 8 | 0 | 1 | 0 |
| 1770114322 | 3 | 34 | 7 | 11 | 0 |
| 1770113727 | 8 | 25 | 2 | 5 | 0 |
| 1770113122 | 0 | 18 | 0 | 3 | 0 |
| 1770112522 | 0 | 7 | 0 | 1 | 0 |
| 1770111922 | 0 | 7 | 0 | 1 | 0 |
| 1770111322 | 260 | 291 | 10 | 13 | 0 |
| 1770110722 | 481 | 504 | 9 | 11 | 0 |
| 1770110122 | 768 | 785 | 13 | 13 | 0 |
| 1770109522 | 409 | 435 | 7 | 8 | 0 |
| 1770108922 | 0 | 12 | 1 | 3 | 0 |
| 1770108322 | 0 | 7 | 0 | 1 | 0 |
| 1770107722 | 4 | 26 | 3 | 8 | 0 |
| 1770107122 | 6 | 28 | 5 | 8 | 0 |
| 1770106522 | 6 | 29 | 3 | 7 | 0 |
| 1770105922 | 46 | 65 | 2 | 4 | 0 |
| 1770105322 | 809 | 833 | 14 | 17 | 0 |
| 1770104722 | 849 | 942 | 10 | 10 | 0 |
| 1770104122 | 523 | 602 | 12 | 16 | 0 |
| 1770103522 | 21 | 34 | 2 | 4 | 0 |
| 1770102922 | 0 | 7 | 0 | 1 | 0 |
| 1770102322 | 223 | 248 | 6 | 9 | 0 |
| 1770101722 | 311 | 340 | 12 | 15 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)