This is the latest recevied telemetry packets stored in our database for station/object DH8GHH-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1751238269 | - | - | - | - | - |
| 1751238244 | 0 | 4 | 23 | 0 | 0 |
| 1751238215 | - | - | - | - | - |
| 1751238063 | 0 | 4 | 22.9 | 17.5 | 0 |
| 1751238034 | 0 | 4 | 23 | 17.5 | 0 |
| 1751237878 | 0 | 4 | 23.1 | 17.5 | 0 |
| 1751237847 | 0 | 4 | 23 | 17.5 | 0 |
| 1751237817 | 0 | 4 | 22.7 | 17.5 | 0 |
| 1751237787 | 0 | 4 | 22.6 | 17.5 | 0 |
| 1751237757 | 0 | 4 | 22.5 | 17.5 | 0 |
| 1751237727 | 0 | 4 | 22.4 | 17.5 | 0 |
| 1751237697 | 0 | 4 | 22.3 | 17.5 | 2 |
| 1751237667 | 0 | 4 | 22.3 | 17.5 | 1 |
| 1751237637 | 0 | 4 | 22.3 | 17.5 | -7 |
| 1751237608 | 0 | 4 | 22.3 | 17.5 | 4 |
| 1751237578 | 0 | 4 | 22.3 | 17.5 | 3 |
| 1751237547 | 0 | 4 | 22.3 | 17.5 | 5 |
| 1751237518 | 0 | 4 | 22.3 | 17.5 | 4 |
| 1751237487 | 0 | 4 | 22.3 | 17.5 | -1 |
| 1751237457 | 0 | 4 | 22.3 | 17.5 | -4 |
| 1751237428 | 0 | 4 | 22.3 | 17 | 6 |
| 1751237397 | 0 | 4 | 22.3 | 17 | 19 |
| 1751237367 | 0 | 4 | 22.4 | 17 | 16 |
| 1751237338 | 0 | 4 | 22.3 | 17 | 5 |
| 1751237308 | 0 | 4 | 22.4 | 17 | 2 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)