APRS Track Direct

My position About ☰

reset

KF0PEC-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KF0PEC-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	amp5A*
1836274460	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762322961	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762321159	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762319357	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762317555	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762315754	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762313952	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762312150	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762310348	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762308546	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762306745	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762304943	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762303141	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762301339	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762299538	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762297736	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762295934	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762294132	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762292331	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762290529	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762288727	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762286925	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762285124	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762283322	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1762281520	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

amp5A: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)