This is the latest recevied telemetry packets stored in our database for station/object VK4RSA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | BLDTemp* | Batt* | TTR PA* | DeCode* | Rx1h* |
|---|---|---|---|---|---|
| 1745050832 | 34 c | 27.09 Volts | 13 c | 93 pkts/h | 16 SPAM |
| 1745049030 | 35 c | 27.09 Volts | 13.5 c | 93 pkts/h | 17 SPAM |
| 1745047229 | 36 c | 27.17 Volts | 14 c | 94 pkts/h | 18 SPAM |
| 1745045427 | 37 c | 27.57 Volts | 15 c | 91 pkts/h | 20 SPAM |
| 1745043625 | 37 c | 27.65 Volts | 15.5 c | 91 pkts/h | 20 SPAM |
| 1745041823 | 37.5 c | 27.65 Volts | 15.5 c | 94 pkts/h | 19 SPAM |
| 1745040022 | 37.5 c | 27.65 Volts | 15.5 c | 93 pkts/h | 17 SPAM |
| 1745038220 | 37.5 c | 27.65 Volts | 15.5 c | 94 pkts/h | 16 SPAM |
| 1745036418 | 37.5 c | 27.65 Volts | 16 c | 93 pkts/h | 15 SPAM |
| 1745034617 | 37 c | 27.65 Volts | 16 c | 89 pkts/h | 15 SPAM |
| 1745032815 | 36.5 c | 27.65 Volts | 15.5 c | 92 pkts/h | 16 SPAM |
| 1745031013 | 36 c | 27.65 Volts | 15.5 c | 98 pkts/h | 15 SPAM |
| 1745029211 | 35.5 c | 27.65 Volts | 15.5 c | 99 pkts/h | 15 SPAM |
| 1745027410 | 34.5 c | 27.65 Volts | 15.5 c | 97 pkts/h | 16 SPAM |
| 1745025608 | 33.5 c | 27.65 Volts | 15.5 c | 92 pkts/h | 16 SPAM |
*Used Equation Coefficients:
BLDTemp: 0, 0.5, -64
Batt: 0, 0.079, 7.5
TTR PA: 0, 0.5, -64
DeCode: 0, 1, 0
Rx1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)