This is the latest recevied telemetry packets stored in our database for station/object W9IZ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkHr* | DigPkHr* | DcEfHr* | DcEfTo* | Value5* |
|---|---|---|---|---|---|
| 1732271869 | 16 pkts | 1 pkts | 51 % | 59 % | 0 |
| 1732271869 | 16 pkts | 1 pkts | 51 % | 59 % | 0 |
| 1732270969 | 17 pkts | 1 pkts | 52 % | 59 % | 0 |
| 1732270069 | 19 pkts | 1 pkts | 56 % | 59 % | 0 |
| 1732270069 | 19 pkts | 1 pkts | 56 % | 59 % | 0 |
| 1732269169 | 18 pkts | 1 pkts | 55 % | 59 % | 0 |
| 1732268269 | 17 pkts | 1 pkts | 57 % | 59 % | 0 |
| 1732268269 | 17 pkts | 1 pkts | 57 % | 59 % | 0 |
| 1732267369 | 18 pkts | 1 pkts | 57 % | 59 % | 0 |
| 1732266469 | 16 pkts | 1 pkts | 54 % | 59 % | 0 |
| 1732266469 | 16 pkts | 1 pkts | 54 % | 59 % | 0 |
| 1732265569 | 16 pkts | 1 pkts | 55 % | 59 % | 0 |
| 1732264670 | 16 pkts | 1 pkts | 55 % | 59 % | 0 |
| 1732264669 | 16 pkts | 1 pkts | 55 % | 59 % | 0 |
| 1732263769 | 17 pkts | 1 pkts | 57 % | 59 % | 0 |
| 1732262870 | 16 pkts | 1 pkts | 57 % | 59 % | 0 |
| 1732262869 | 16 pkts | 1 pkts | 57 % | 59 % | 0 |
| 1732261969 | 17 pkts | 1 pkts | 58 % | 59 % | 0 |
| 1732261069 | 16 pkts | 1 pkts | 57 % | 59 % | 0 |
| 1732260169 | 16 pkts | 1 pkts | 58 % | 59 % | 0 |
| 1732259270 | 15 pkts | 1 pkts | 55 % | 59 % | 0 |
| 1732259269 | 15 pkts | 1 pkts | 55 % | 59 % | 0 |
| 1732258369 | 15 pkts | 1 pkts | 55 % | 59 % | 0 |
| 1732257471 | 14 pkts | 1 pkts | 50 % | 59 % | 0 |
| 1732257470 | 14 pkts | 1 pkts | 50 % | 59 % | 0 |
*Used Equation Coefficients:
RxPkHr: 0, 1, 0
DigPkHr: 0, 1, 0
DcEfHr: 0, 1, 0
DcEfTo: 0, 1, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)