This is the latest recevied telemetry packets stored in our database for station/object IU2GED. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Rx10m* | Rx1h* | Dg10m* | DgR* | Eff* |
---|---|---|---|---|---|
1719660459 | 7 Pkt | 40 Pkt | 0 Pkt | 2.29 Pcnt | 47 Pcnt |
1719660159 | 10 Pkt | 50 Pkt | 0 Pkt | 2.29 Pcnt | 47 Pcnt |
1719659858 | 6 Pkt | 40 Pkt | 0 Pkt | 2.29 Pcnt | 47 Pcnt |
1719659559 | 12 Pkt | 50 Pkt | 0 Pkt | 2.29 Pcnt | 47 Pcnt |
1719659259 | 10 Pkt | 50 Pkt | 0 Pkt | 2.29 Pcnt | 47 Pcnt |
1719658959 | 7 Pkt | 50 Pkt | 0 Pkt | 2.29 Pcnt | 47 Pcnt |
1719658659 | 4 Pkt | 50 Pkt | 0 Pkt | 2.29 Pcnt | 47 Pcnt |
1719658359 | 7 Pkt | 40 Pkt | 0 Pkt | 2.29 Pcnt | 47 Pcnt |
1719658059 | 7 Pkt | 40 Pkt | 0 Pkt | 2.29 Pcnt | 47 Pcnt |
1719657759 | 5 Pkt | 50 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719657459 | 5 Pkt | 50 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719657159 | 8 Pkt | 50 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719656859 | 7 Pkt | 50 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719656559 | 14 Pkt | 50 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719656259 | 12 Pkt | 50 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719655959 | 6 Pkt | 40 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719655659 | 8 Pkt | 40 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719655359 | 4 Pkt | 40 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719655059 | 2 Pkt | 50 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719654759 | 11 Pkt | 50 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719654459 | 13 Pkt | 50 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719654159 | 9 Pkt | 40 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719653859 | 8 Pkt | 40 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719653559 | 6 Pkt | 40 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
1719653259 | 3 Pkt | 40 Pkt | 0 Pkt | 2.3 Pcnt | 47 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)