This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | CPU* | p-Temp* | alt* | dB* |
|---|---|---|---|---|---|
| 1792002572 | 1204 | 34.3 | 69.2 | -168 | -48 |
| 1792002094 | 1204 | 33.8 | 69 | -168 | -49 |
| 1792001374 | 1204 | 33.2 | 68.7 | -171 | -47 |
| 1792000771 | 1204 | 33.2 | 68.3 | -171 | -47 |
| 1792000653 | 1204 | 33.2 | 68.2 | -171 | -46 |
| 1791999933 | 1204 | 32.7 | 67.9 | -176 | -48 |
| 1791999213 | 1205 | 33.2 | 67.6 | -178 | -45 |
| 1791998972 | 1204 | 33.2 | 67.4 | -180 | -46 |
| 1791998494 | 1204 | 32.7 | 67.2 | -183 | -47 |
| 1791997773 | 1204 | 33.2 | 66.6 | -182 | -48 |
| 1791997172 | 1205 | 32.2 | 66.2 | -181 | -47 |
| 1791997053 | 1204 | 32.2 | 66.1 | -180 | -44 |
| 1791996333 | 1204 | 32.2 | 65.4 | -178 | -47 |
| 1791995613 | 1204 | 31.1 | 64.7 | -181 | -48 |
| 1791995372 | 1204 | 31.1 | 64.7 | -181 | -48 |
| 1791994893 | 1204 | 31.6 | 64.7 | -182 | -48 |
| 1791994173 | 1204 | 31.1 | 64.6 | -178 | -47 |
| 1791993572 | 1204 | 31.1 | 64.6 | -177 | -47 |
| 1791993453 | 1204 | 31.1 | 64.6 | -177 | -47 |
| 1791992734 | 1204 | 31.1 | 64.5 | -174 | -46 |
| 1791992013 | 1204 | 31.6 | 65.2 | -172 | -45 |
| 1791991772 | 1205 | 31.6 | 65.3 | -170 | -50 |
| 1791991293 | 1204 | 31.1 | 65.3 | -169 | -49 |
| 1791990573 | 1204 | 31.6 | 65.4 | -168 | -48 |
| 1791989972 | 1204 | 31.6 | 65.5 | -167 | -48 |
*Used Equation Coefficients:
DC: 0, 1, 1000
CPU: 0, 0.1, 0
p-Temp: 0, 0.1, 0
alt: 0, 1, -1000
dB: 0, -1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)