APRS Track Direct

My position About ☰

reset

VA3RAW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA3RAW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1774137514	12.53 Volt	160 Pkt	64 Pcnt	31 Pkt
1774137214	12.53 Volt	150 Pkt	62 Pcnt	30 Pkt
1774136914	12.53 Volt	130 Pkt	61 Pcnt	29 Pkt
1774136614	12.53 Volt	120 Pkt	60 Pcnt	20 Pkt
1774136314	12.53 Volt	120 Pkt	60 Pcnt	25 Pkt
1774136014	12.53 Volt	120 Pkt	61 Pcnt	26 Pkt
1774135714	12.53 Volt	120 Pkt	61 Pcnt	27 Pkt
1774135414	12.53 Volt	130 Pkt	61 Pcnt	30 Pkt
1774135114	12.53 Volt	120 Pkt	57 Pcnt	22 Pkt
1774134814	12.53 Volt	110 Pkt	56 Pcnt	15 Pkt
1774134514	12.53 Volt	110 Pkt	54 Pcnt	16 Pkt
1774134214	12.53 Volt	100 Pkt	52 Pcnt	11 Pkt
1774133914	12.53 Volt	100 Pkt	55 Pcnt	8 Pkt
1774133614	12.53 Volt	110 Pkt	56 Pcnt	8 Pkt
1774133314	12.53 Volt	120 Pkt	57 Pcnt	18 Pkt
1774133014	12.53 Volt	110 Pkt	56 Pcnt	21 Pkt
1774132714	12.53 Volt	100 Pkt	53 Pcnt	28 Pkt
1774132414	12.53 Volt	90 Pkt	50 Pcnt	33 Pkt
1774132114	12.53 Volt	70 Pkt	46 Pcnt	26 Pkt
1774131814	12.53 Volt	60 Pkt	45 Pcnt	18 Pkt
1774131514	12.53 Volt	50 Pkt	44 Pcnt	11 Pkt
1774131214	12.53 Volt	40 Pkt	41 Pcnt	1 Pkt
1774130914	12.53 Volt	40 Pkt	42 Pcnt	13 Pkt
1774130614	12.53 Volt	40 Pkt	41 Pcnt	22 Pkt
1774130314	12.53 Volt	30 Pkt	36 Pcnt	18 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)