This is the latest recevied telemetry packets stored in our database for station/object ER-IR3UI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791742794 | 0 | 315 | 0 | 24 | 0 |
| 1791742194 | 0 | 101 | 0 | 21 | 0 |
| 1791741594 | 0 | 44 | 0 | 16 | 0 |
| 1791740994 | 0 | 62 | 0 | 7 | 0 |
| 1791740394 | 0 | 120 | 0 | 30 | 0 |
| 1791739794 | 0 | 14 | 0 | 7 | 0 |
| 1791739194 | 0 | 72 | 0 | 9 | 0 |
| 1791738594 | 0 | 58 | 0 | 18 | 0 |
| 1791737994 | 0 | 297 | 0 | 33 | 0 |
| 1791737394 | 0 | 78 | 0 | 8 | 0 |
| 1791736794 | 0 | 770 | 0 | 12 | 0 |
| 1791736194 | 0 | 190 | 0 | 10 | 0 |
| 1791735594 | 0 | 99 | 0 | 17 | 0 |
| 1791734994 | 0 | 26 | 0 | 5 | 0 |
| 1791734394 | 16 | 8 | 3 | 4 | 0 |
| 1791733794 | 5 | 98 | 1 | 25 | 0 |
| 1791733194 | 0 | 138 | 0 | 44 | 0 |
| 1791732594 | 2 | 435 | 1 | 19 | 0 |
| 1791731994 | 10 | 435 | 5 | 29 | 0 |
| 1791731394 | 2 | 313 | 1 | 36 | 0 |
| 1791730794 | 2 | 143 | 1 | 42 | 0 |
| 1791730194 | 6 | 362 | 3 | 41 | 0 |
| 1791729594 | 26 | 90 | 5 | 27 | 0 |
| 1791728994 | 18 | 1 | 8 | 2 | 0 |
| 1791728394 | 0 | 79 | 0 | 9 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)