This is the latest recevied telemetry packets stored in our database for station/object EA5KAO-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TempCaja* | HumCaja* | Bateria* | RxLoRa* | Digi* |
|---|---|---|---|---|---|
| 1791742949 | 30 degC | 41 % | 0 V | 1 paq | 0 paq |
| 1791742349 | 30 degC | 41 % | 0 V | 4 paq | 0 paq |
| 1791741749 | 30 degC | 40 % | 0 V | 3 paq | 0 paq |
| 1791741149 | 30 degC | 40 % | 0 V | 1 paq | 0 paq |
| 1791740549 | 29.5 degC | 39 % | 0 V | 3 paq | 0 paq |
| 1791739949 | 29.5 degC | 39 % | 0 V | 3 paq | 0 paq |
| 1791739349 | 29.5 degC | 39 % | 0 V | 2 paq | 0 paq |
| 1791738749 | 29 degC | 40 % | 0 V | 4 paq | 0 paq |
| 1791738149 | 29 degC | 39 % | 0 V | 4 paq | 0 paq |
| 1791737549 | 29 degC | 38 % | 0 V | 1 paq | 0 paq |
| 1791736949 | 29 degC | 37 % | 0 V | 4 paq | 0 paq |
| 1791736349 | 29 degC | 38 % | 0 V | 4 paq | 0 paq |
| 1791735749 | 29 degC | 35 % | 0 V | 1 paq | 0 paq |
| 1791735149 | 28.5 degC | 33 % | 0 V | 4 paq | 0 paq |
| 1791734549 | 28.5 degC | 33 % | 0 V | 5 paq | 0 paq |
| 1791733949 | 28.5 degC | 33 % | 0 V | 2 paq | 0 paq |
| 1791733349 | 28.5 degC | 33 % | 0 V | 3 paq | 0 paq |
| 1791732749 | 28.5 degC | 33 % | 0 V | 4 paq | 0 paq |
| 1791732149 | 28.5 degC | 33 % | 0 V | 3 paq | 0 paq |
| 1791731549 | 28.5 degC | 34 % | 0 V | 4 paq | 0 paq |
| 1791730949 | 28.5 degC | 34 % | 0 V | 3 paq | 0 paq |
| 1791730349 | 28.5 degC | 34 % | 0 V | 1 paq | 0 paq |
| 1791729749 | 28.5 degC | 34 % | 0 V | 4 paq | 0 paq |
| 1791729149 | 28.5 degC | 34 % | 0 V | 4 paq | 0 paq |
| 1791728549 | 28.5 degC | 34 % | 0 V | 2 paq | 0 paq |
*Used Equation Coefficients:
TempCaja: 0, 0.5, -40
HumCaja: 0, 1, 0
Bateria: 0, 0.02, 0
RxLoRa: 0, 1, 0
Digi: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)