This is the latest recevied telemetry packets stored in our database for station/object LW2EDM-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791727034 | 3.57 VDC | 177.4 C | 688.25 hPa | 0 | 0 |
| 1791727001 | 3.6 VDC | 177.4 C | 687.38 hPa | 0 | 0 |
| 1791726987 | 3.6 VDC | 177.4 C | 687.13 hPa | 0 | 0 |
| 1791726950 | 3.58 VDC | 24.9 C | 686.75 hPa | 0 | 0 |
| 1791726868 | 3.49 VDC | 15.4 C | 1024.38 hPa | 0 | 0 |
| 1791726856 | 3.49 VDC | 15.4 C | 1024.38 hPa | 0 | 0 |
| 1791726824 | 3.57 VDC | 15.3 C | 1025.25 hPa | 0 | 0 |
| 1791726701 | 3.52 VDC | 15.1 C | 1025.13 hPa | 0 | 0 |
| 1791726676 | 3.52 VDC | 15.1 C | 1018 hPa | 0 | 0 |
| 1791726589 | 3.55 VDC | 15 C | 1018 hPa | 0 | 0 |
| 1791726550 | 3.59 VDC | 15 C | 1025 hPa | 0 | 0 |
| 1791726513 | 3.56 VDC | 14.9 C | 1024.13 hPa | 0 | 0 |
| 1791726470 | 3.56 VDC | 14.9 C | 1025.13 hPa | 0 | 0 |
| 1791726400 | 3.59 VDC | 14.8 C | 1025.25 hPa | 0 | 0 |
| 1791726386 | 3.59 VDC | 14.8 C | 1025.38 hPa | 0 | 0 |
| 1791726373 | 3.59 VDC | 14.8 C | 1025.63 hPa | 0 | 0 |
| 1791726225 | 3.55 VDC | 14.6 C | 1030.38 hPa | 0 | 0 |
| 1791725825 | 3.53 VDC | 15.3 C | 1016.13 hPa | 0 | 0 |
| 1791715453 | 3.63 VDC | 20 C | 1025.25 hPa | 0 | 0 |
| 1791714552 | 3.57 VDC | 19.9 C | 1025 hPa | 0 | 0 |
| 1791713651 | 3.59 VDC | 19.8 C | 1023.5 hPa | 0 | 0 |
| 1791712750 | 3.63 VDC | 19.7 C | 1024.38 hPa | 0 | 0 |
| 1791711849 | 3.59 VDC | 19.5 C | 1024.25 hPa | 0 | 0 |
| 1791710948 | 3.59 VDC | 19.1 C | 1023.75 hPa | 0 | 0 |
| 1791710048 | 3.59 VDC | 19.3 C | 1024.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)