APRS Track Direct

My position About ☰

reset

XE2VP Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2VP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	VoltWX*	VoltFue*	MilAmp*	TempEx*	TempI*
1790652000	13.05 Volt	12.8 Volt	4485 mA	33 C	34.5 C
1790651101	13.05 Volt	12.8 Volt	4485 mA	33 C	35 C
1790650201	13.05 Volt	12.8 Volt	4485 mA	33 C	35 C
1790649301	13.05 Volt	12.8 Volt	4485 mA	33.5 C	35 C
1790648401	13.05 Volt	12.8 Volt	4485 mA	33.5 C	35.5 C
1790647501	13.05 Volt	12.8 Volt	4485 mA	33.5 C	35.5 C
1790646601	13.05 Volt	12.8 Volt	4485 mA	34 C	35.5 C
1790645701	13.05 Volt	12.8 Volt	4485 mA	34 C	36 C
1790644801	13.05 Volt	12.8 Volt	4485 mA	34 C	36 C
1790643901	13.05 Volt	12.8 Volt	4485 mA	34 C	36 C
1790643001	13.05 Volt	12.8 Volt	4485 mA	34.5 C	36.5 C
1790642101	13.05 Volt	12.8 Volt	4485 mA	35 C	37 C
1790641201	13.05 Volt	12.8 Volt	4465.5 mA	35.5 C	37.5 C
1790640301	13.05 Volt	12.8 Volt	4465.5 mA	36 C	38 C
1790639401	13.05 Volt	12.8 Volt	4465.5 mA	36 C	38.5 C
1790638501	13.05 Volt	12.8 Volt	4465.5 mA	36.5 C	39 C
1790637601	13.05 Volt	12.8 Volt	4465.5 mA	37 C	39 C
1790636701	13.05 Volt	12.8 Volt	4465.5 mA	37.5 C	40 C
1790635801	13.05 Volt	12.8 Volt	4465.5 mA	37.5 C	40.5 C
1790634901	13.05 Volt	12.8 Volt	4446 mA	37.5 C	41 C
1790634001	13.05 Volt	12.8 Volt	4446 mA	37.5 C	41 C
1790633101	13.05 Volt	12.8 Volt	4446 mA	38 C	41 C
1790632201	13.05 Volt	12.8 Volt	4446 mA	38.5 C	42 C
1790631301	13.05 Volt	12.8 Volt	4446 mA	38.5 C	42 C
1790630401	13.05 Volt	12.8 Volt	4446 mA	37.5 C	42 C

*Used Equation Coefficients:

VoltWX: 0, 0.075, 0

VoltFue: 0, 0.1, 0

MilAmp: 0, 19.5, 0

TempEx: 0, 0.5, -64

TempI: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)