APRS Track Direct

My position About ☰

reset

OK0DV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK0DV. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Temp*	TX TRX Temp*	IN Temp*	IN Humidity*	OUT Temp*
1836274615	39 deg.C	31 deg.C	20 deg.C	57 %	20 deg.C
1836274464	40 deg.C	31 deg.C	21 deg.C	57 %	20 deg.C
1836274315	39 deg.C	32 deg.C	20 deg.C	57 %	20 deg.C
1836274164	39 deg.C	32 deg.C	20 deg.C	57 %	20 deg.C
1836274014	39 deg.C	31 deg.C	20 deg.C	57 %	20 deg.C
1762336740	33 deg.C	27 deg.C	14 deg.C	78 %	12 deg.C
1762336440	34 deg.C	27 deg.C	14 deg.C	78 %	12 deg.C
1762336140	33 deg.C	27 deg.C	14 deg.C	79 %	12 deg.C
1762335840	33 deg.C	27 deg.C	14 deg.C	79 %	12 deg.C
1762335540	34 deg.C	27 deg.C	14 deg.C	79 %	12 deg.C
1762335240	34 deg.C	27 deg.C	14 deg.C	77 %	12 deg.C
1762334940	34 deg.C	27 deg.C	14 deg.C	76 %	13 deg.C
1762334640	34 deg.C	27 deg.C	14 deg.C	76 %	13 deg.C
1762334340	34 deg.C	27 deg.C	15 deg.C	76 %	13 deg.C
1762334040	34 deg.C	27 deg.C	14 deg.C	77 %	13 deg.C
1762333740	33 deg.C	27 deg.C	14 deg.C	78 %	12 deg.C
1762333440	33 deg.C	27 deg.C	14 deg.C	78 %	12 deg.C
1762333140	33 deg.C	27 deg.C	14 deg.C	78 %	12 deg.C
1762332840	33 deg.C	27 deg.C	14 deg.C	78 %	12 deg.C
1762332540	33 deg.C	28 deg.C	14 deg.C	78 %	12 deg.C
1762332240	33 deg.C	27 deg.C	14 deg.C	78 %	13 deg.C
1762331940	33 deg.C	27 deg.C	13 deg.C	78 %	12 deg.C
1762331647	33 deg.C	27 deg.C	13 deg.C	78 %	12 deg.C
1762331340	33 deg.C	27 deg.C	13 deg.C	78 %	12 deg.C
1762331041	33 deg.C	28 deg.C	13 deg.C	78 %	12 deg.C

*Used Equation Coefficients:

CPU Temp: 0, 0.5, -25

TX TRX Temp: 0, 0.5, -25

IN Temp: 0, 0.5, -25

IN Humidity: 0, 0.5, -25

OUT Temp: 0, 0.5, -25

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)