This is the latest recevied telemetry packets stored in our database for station/object VE2RPL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790640891 | 502 | 566 | 567 | 0 | 0 |
| 1790639088 | 502 | 567 | 567 | 0 | 0 |
| 1790638187 | 502 | 567 | 567 | 0 | 0 |
| 1790637285 | 502 | 567 | 567 | 0 | 0 |
| 1790636379 | 503 | 567 | 567 | 0 | 0 |
| 1790635478 | 503 | 568 | 567 | 0 | 0 |
| 1790634576 | 504 | 568 | 568 | 0 | 0 |
| 1790633674 | 504 | 568 | 568 | 0 | 0 |
| 1790632773 | 504 | 568 | 569 | 0 | 0 |
| 1790631871 | 500 | 568 | 569 | 0 | 0 |
| 1790630969 | 509 | 568 | 569 | 0 | 0 |
| 1790629167 | 517 | 569 | 570 | 0 | 0 |
| 1790628265 | 525 | 569 | 571 | 0 | 0 |
| 1790627364 | 533 | 569 | 571 | 0 | 0 |
| 1790626463 | 536 | 569 | 572 | 0 | 0 |
| 1790625561 | 529 | 569 | 573 | 0 | 0 |
| 1790624659 | 537 | 569 | 572 | 0 | 0 |
| 1790623758 | 540 | 569 | 574 | 0 | 0 |
| 1790622856 | 541 | 569 | 574 | 0 | 0 |
| 1790621955 | 540 | 569 | 572 | 0 | 0 |
| 1790621050 | 540 | 569 | 572 | 0 | 0 |
| 1790620149 | 541 | 569 | 571 | 0 | 0 |
| 1790619247 | 538 | 569 | 571 | 0 | 0 |
| 1790618346 | 541 | 569 | 572 | 0 | 0 |
| 1790617445 | 541 | 569 | 572 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)