This is the latest recevied telemetry packets stored in our database for station/object XE2XEH. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | CPU* | Mem* | WiFi* | Value5* |
|---|---|---|---|---|---|
| 1782453003 | 57 C | 17.64 % | 21.95 % | 100 dBm | 0 |
| 1782452702 | 43 C | 3.92 % | 21.95 % | 100 dBm | 0 |
| 1782452403 | 64 C | 11.76 % | 21.95 % | 100 dBm | 0 |
| 1782452103 | 76 C | 84.67 % | 24.7 % | 100 dBm | 0 |
| 1782451803 | 76 C | 84.67 % | 25.87 % | 100 dBm | 0 |
| 1782451503 | 89 C | 76.83 % | 48.61 % | 100 dBm | 0 |
| 1782451204 | 88 C | 84.67 % | 40.77 % | 100 dBm | 0 |
| 1782450904 | 70 C | 85.85 % | 40.77 % | 100 dBm | 0 |
| 1782450604 | 77 C | 89.77 % | 37.63 % | 100 dBm | 0 |
| 1782450304 | 73 C | 84.67 % | 37.63 % | 100 dBm | 0 |
| 1782450004 | 74 C | 77.62 % | 36.85 % | 100 dBm | 0 |
| 1782449703 | 65 C | 26.66 % | 36.85 % | 100 dBm | 0 |
| 1782449403 | 69 C | 17.64 % | 35.67 % | 100 dBm | 0 |
| 1782449102 | 84 C | 99.96 % | 34.89 % | 100 dBm | 0 |
| 1782447904 | 72 C | 75.66 % | 41.94 % | 100 dBm | 0 |
| 1782447303 | 76 C | 71.74 % | 44.69 % | 100 dBm | 0 |
| 1782447004 | 80 C | 64.68 % | 44.69 % | 100 dBm | 0 |
| 1782446703 | 76 C | 89.77 % | 43.9 % | 100 dBm | 0 |
| 1782446403 | 75 C | 94.86 % | 43.9 % | 100 dBm | 0 |
| 1782446103 | 78 C | 84.67 % | 44.69 % | 100 dBm | 0 |
| 1782445803 | 70 C | 80.75 % | 44.69 % | 100 dBm | 0 |
| 1782445503 | 83 C | 99.96 % | 44.69 % | 100 dBm | 0 |
| 1782445212 | 72 C | 86.63 % | 44.69 % | 100 dBm | 0 |
| 1782444904 | 74 C | 95.65 % | 41.94 % | 100 dBm | 0 |
| 1782444608 | 79 C | 89.77 % | 41.94 % | 100 dBm | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
CPU: 0, 0.392, 0
Mem: 0, 0.392, 0
WiFi: 0, -0.392, 100
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)