This is the latest recevied telemetry packets stored in our database for station/object VK4RSM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744888374 | 126 | 73 | 0 | 37 | 49 |
| 1744887173 | 126 | 73 | 0 | 36 | 48 |
| 1744885974 | 126 | 74 | 0 | 36 | 48 |
| 1744884775 | 126 | 75 | 0 | 36 | 48 |
| 1744883573 | 126 | 75 | 0 | 36 | 48 |
| 1744882374 | 126 | 75 | 0 | 36 | 48 |
| 1744881172 | 126 | 76 | 0 | 36 | 47 |
| 1744879973 | 127 | 76 | 0 | 35 | 47 |
| 1744878774 | 127 | 78 | 0 | 35 | 47 |
| 1744877575 | 127 | 79 | 0 | 35 | 46 |
| 1744876374 | 127 | 82 | 0 | 34 | 45 |
| 1744875175 | 127 | 83 | 0 | 33 | 44 |
| 1744873974 | 128 | 85 | 0 | 33 | 43 |
| 1744872775 | 129 | 87 | 0 | 32 | 43 |
| 1744871574 | 131 | 89 | 0 | 32 | 42 |
| 1744870375 | 135 | 90 | 0 | 31 | 41 |
| 1744869174 | 134 | 92 | 0 | 30 | 40 |
| 1744867975 | 130 | 93 | 0 | 30 | 40 |
| 1744866772 | 130 | 94 | 0 | 30 | 39 |
| 1744865573 | 130 | 95 | 0 | 30 | 39 |
| 1744864374 | 132 | 95 | 0 | 30 | 39 |
| 1744863175 | 137 | 96 | 0 | 29 | 38 |
| 1744861973 | 132 | 96 | 0 | 29 | 38 |
| 1744860774 | 132 | 96 | 0 | 29 | 38 |
| 1744859575 | 130 | 97 | 0 | 29 | 38 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)