APRS Track Direct

My position About ☰

reset

9W8AKN-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W8AKN-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1791740282	4 Pkt	94 Pkt	0 Pkt	-73 dBm	4.98 V
1791736651	6 Pkt	90 Pkt	0 Pkt	-73 dBm	5.02 V
1791733019	5 Pkt	93 Pkt	0 Pkt	-76 dBm	5.02 V
1791729386	6 Pkt	102 Pkt	0 Pkt	-73 dBm	4.98 V
1791725752	0 Pkt	3 Pkt	0 Pkt	-77 dBm	4.98 V
1791724664	6 Pkt	91 Pkt	0 Pkt	-75 dBm	4.98 V
1791721033	6 Pkt	102 Pkt	0 Pkt	-75 dBm	4.98 V
1791717401	6 Pkt	106 Pkt	0 Pkt	-76 dBm	4.98 V
1791713769	5 Pkt	134 Pkt	9 Pkt	-75 dBm	5.02 V
1791710134	5 Pkt	223 Pkt	56 Pkt	-74 dBm	5.04 V
1791706490	6 Pkt	124 Pkt	22 Pkt	-74 dBm	5.02 V
1791702853	6 Pkt	141 Pkt	26 Pkt	-75 dBm	4.98 V
1791699218	6 Pkt	97 Pkt	14 Pkt	-74 dBm	4.98 V
1791695584	6 Pkt	99 Pkt	12 Pkt	-75 dBm	5.02 V
1791691952	6 Pkt	120 Pkt	17 Pkt	-74 dBm	4.98 V
1791688318	6 Pkt	107 Pkt	14 Pkt	-75 dBm	5.04 V
1791684685	6 Pkt	97 Pkt	5 Pkt	-76 dBm	4.98 V
1791681051	6 Pkt	96 Pkt	0 Pkt	-75 dBm	4.98 V
1791677419	6 Pkt	95 Pkt	0 Pkt	-74 dBm	4.98 V
1791673786	6 Pkt	99 Pkt	0 Pkt	-76 dBm	4.98 V
1791670151	6 Pkt	91 Pkt	0 Pkt	-75 dBm	5 V
1791666516	0 Pkt	4 Pkt	0 Pkt	-75 dBm	4.98 V
1791664721	0 Pkt	4 Pkt	0 Pkt	-76 dBm	4.98 V
1791660961	6 Pkt	98 Pkt	0 Pkt	-72 dBm	4.96 V
1791657329	6 Pkt	99 Pkt	0 Pkt	-72 dBm	4.96 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)