APRS Track Direct

My position About ☰

reset

LU9OZX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU9OZX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1791762286	0 Pkt	70 Pkt	0 Pkt	-31 dBm	14.38 V
1791761356	0 Pkt	120 Pkt	0 Pkt	-30 dBm	14.81 V
1791760427	2 Pkt	75 Pkt	0 Pkt	-31 dBm	15.22 V
1791759497	0 Pkt	119 Pkt	0 Pkt	-31 dBm	15.42 V
1791758566	0 Pkt	77 Pkt	0 Pkt	-31 dBm	14.97 V
1791757640	0 Pkt	52 Pkt	0 Pkt	-30 dBm	15.65 V
1791756713	1 Pkt	65 Pkt	0 Pkt	-31 dBm	15.05 V
1791755785	2 Pkt	65 Pkt	0 Pkt	-30 dBm	15.61 V
1791754856	1 Pkt	71 Pkt	0 Pkt	-29 dBm	15.91 V
1791753928	2 Pkt	44 Pkt	0 Pkt	-30 dBm	15.71 V
1791753001	1 Pkt	42 Pkt	0 Pkt	-30 dBm	15.96 V
1791752077	2 Pkt	56 Pkt	0 Pkt	-30 dBm	15.59 V
1791751150	0 Pkt	79 Pkt	0 Pkt	-30 dBm	15.75 V
1791750222	3 Pkt	49 Pkt	0 Pkt	-31 dBm	16.24 V
1791749298	0 Pkt	55 Pkt	0 Pkt	-31 dBm	15.22 V
1791748372	0 Pkt	33 Pkt	0 Pkt	-31 dBm	14.54 V
1791747447	0 Pkt	44 Pkt	0 Pkt	-31 dBm	16.06 V
1791746521	1 Pkt	38 Pkt	1 Pkt	-30 dBm	15.75 V
1791745596	1 Pkt	52 Pkt	0 Pkt	-31 dBm	15.87 V
1791744669	1 Pkt	61 Pkt	0 Pkt	-30 dBm	16.14 V
1791743743	1 Pkt	35 Pkt	0 Pkt	-31 dBm	15.96 V
1791742818	2 Pkt	42 Pkt	0 Pkt	-31 dBm	15.57 V
1791741892	0 Pkt	52 Pkt	0 Pkt	-30 dBm	15.81 V
1791740967	0 Pkt	58 Pkt	0 Pkt	-30 dBm	15.44 V
1791740040	0 Pkt	62 Pkt	0 Pkt	-30 dBm	16.3 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)