This is the latest recevied telemetry packets stored in our database for station/object DL8FBP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1836273963 | 995.9 hPa | 22.3 C deg | 52.9 % | 350 - | 0 C deg |
| 1766163125 | 996.5 hPa | 17.6 C deg | 46.2 % | 692 - | 0 C deg |
| 1766161325 | 996.5 hPa | 17.4 C deg | 46.6 % | 696 - | 0 C deg |
| 1766152239 | 996 hPa | 17.2 C deg | 45.9 % | 735 - | 0 C deg |
| 1766143162 | 995.8 hPa | 17.1 C deg | 45.6 % | 747 - | 0 C deg |
| 1766128633 | 994.9 hPa | 15.7 C deg | 46.7 % | 808 - | 0 C deg |
| 1766119569 | 994.2 hPa | 15.6 C deg | 46.9 % | 801 - | 0 C deg |
| 1766110480 | 994.3 hPa | 16.1 C deg | 46.6 % | 769 - | 0 C deg |
| 1766108665 | 994.5 hPa | 16.2 C deg | 46.5 % | 755 - | 0 C deg |
| 1766106853 | 994.4 hPa | 16.4 C deg | 46.3 % | 752 - | 0 C deg |
| 1766103223 | 994.5 hPa | 16.7 C deg | 46 % | 735 - | 0 C deg |
| 1766099593 | 994.5 hPa | 17.2 C deg | 45.5 % | 723 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)